Design of Dual-Axial Electro-Hydraulic Servo Pump-Controlled Folding Machine

被引:0
|
作者
Wong, Ray-Hwa [1 ]
Wong, Wei-Heng [2 ]
机构
[1] Hwa Hsia Univ Technol, Dept Mech Engn, New Taipei 235, Taiwan
[2] Natl Taiwan Ocean Univ, Dept Elect Engn, Keelung 202, Taiwan
来源
JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS | 2017年 / 38卷 / 04期
关键词
pump-controlled; valve-controlled; energy saving; coupled adaptive self-organizing sliding-mode fuzzy controller; SYSTEMS;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Electro-hydraulic servo control systems can be classified as throttling type and volumetric type system. The throttling type system is controlled by servo-valve and has faster response and higher accuracy, however, its noise is higher and energy efficiency is lower. On the contrary, the volumetric type system is pump-controlled. It has the advantage of higher energy efficiency and larger steady-state stiffness. However, its response is sluggish. In this paper a dual-axial electro-hydraulic servo pump-controlled folding machine (PCFM) is designed and manufactured, in order to meet the requirements of energy saving. Coupled Adaptive Self-Organizing Sliding-Mode Fuzzy Controller (CASOSMFC) is used as the controller of PCFM, which is composed of sliding-mode fuzzy controllers (SMFC), self-organizing learning mechanisms, adaptive laws and level-modify mechanism. The SMFC reduce 2-dimensional fuzzy rules into 1-dimensional. Self-learning mechanism can modify fuzzy rules online improve time response. Adaptation gain can adjust the defuzzification proportional factor on-line to improve the control response. Level-modify mechanisms are setup for the synchronous control function. Experiment result shows that the rising time of PCFM is a little bit slower than that of the electro-hydraulic servo valve-controlled folding machine (VCFM). However, it has better synchronicity and is energy saving, so, PCFM is an option to replace VCFM.
引用
收藏
页码:367 / 372
页数:6
相关论文
共 50 条
  • [1] Design of Dual-Axial Electro-Hydraulic Servo Pump-Controlled Folding Machine
    Wong, Ray-Hwa, 1600, Chinese Mechanical Engineering Society (38):
  • [2] Modeling of electro-hydraulic position servo systems of pump-controlled cylinder
    Gao, Qiang
    Jin, Yong
    Wang, Li
    Hou, Yuan-Long
    Ji, Li-Jun
    Binggong Xuebao/Acta Armamentarii, 2011, 32 (08): : 950 - 956
  • [3] Time Delay Control of a Pump-controlled Electro-hydraulic Actuator
    Lin, Maolin
    Kim, Jinwook
    Ba, Dang Xuan
    Park, Hyung Gyu
    Ahn, Kyoung Kwan
    Yoon, Jong Il
    2015 15TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2015, : 847 - 850
  • [4] Modeling of Electro-hydraulic Position Servo System of Pump-Controlled Cylinder Based on HHGA-RBFNN
    Gao Qiang
    Ji Li-jun
    Hou Yuan-long
    Tong Zhong-zhi
    Jin Yong
    2011 INTERNATIONAL CONFERENCE ON ELECTRONICS, COMMUNICATIONS AND CONTROL (ICECC), 2011, : 335 - 339
  • [5] Extended-state-observer based sliding mode control for pump-controlled electro-hydraulic servo system
    Guo X.
    Wang C.
    Liu H.
    Zhang Z.
    Ji X.
    Zhao B.
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2020, 46 (06): : 1159 - 1168
  • [6] A Robust Simplified Backstepping Control Approach for Pump-Controlled Electro-Hydraulic Systems
    Ba, Dang Xuan
    Ahn, Kyoung Kwan
    AETA 2016: RECENT ADVANCES IN ELECTRICAL ENGINEERING AND RELATED SCIENCES: THEORY AND APPLICATION, 2017, 415 : 108 - 117
  • [7] A Study on the Electro-Hydraulic Coupling Characteristics of an Electro-Hydraulic Servo Pump Control System
    Jiang, Wenguang
    Zhang, Cheng
    Jia, Pengshuo
    Yan, Guishan
    Ma, Rui
    Chen, Gexin
    Ai, Chao
    Zhang, Tiangui
    PROCESSES, 2022, 10 (08)
  • [8] Identification and Modeling of a Servo Pump-Controlled Hydraulic System
    Shi, Shengyu
    He, Zhilin
    Zeng, Debao
    Huang, Pu
    Jin, Gang
    IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2024,
  • [9] Closed-Circuit Pump-Controlled Electro-Hydraulic Steering System for Pure Electric Wheel Loader
    Guo, Tong
    Wu, Biao
    Lin, Tianliang
    Chen, Honghui
    Chen, Qihuai
    APPLIED SCIENCES-BASEL, 2022, 12 (11):
  • [10] The high response and high efficiency velocity control of a hydraulic injection molding machine using a variable rotational speed electro-hydraulic pump-controlled system
    Mao-Hsiung Chiang
    Chung-Chieh Chen
    Chung-Feng Jeffrey Kuo
    The International Journal of Advanced Manufacturing Technology, 2009, 43 : 841 - 851