3D Printed E-Band Hybrid Coupler

被引:33
作者
Lomakin, K. [1 ]
Klein, L. [1 ]
Ringel, L. [1 ]
Ringel, J. [1 ]
Sippel, M. [1 ]
Helmreich, K. [1 ]
Gold, G. [1 ]
机构
[1] Friedrich Alexander Univ Erlangen Nuernberg FAU, Inst Microwaves & Photon, D-91058 Erlangen, Germany
关键词
Additive manufacturing; electroless silverplating; hybrid coupler; slotted waveguides;
D O I
10.1109/LMWC.2019.2931458
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In this letter, an additively manufactured 3 dB hybrid coupler is presented. While the geometrical structure is generated by a stereolithography (SLA) printer from UV curable photopolymer resin as one single part, conductive coating is provided by an electroless silverplating process. The utilized slotted waveguide approach improves the solvent flow during metal plating and therefore enables the fabrication of complex waveguide structures. Measured imbalance between the through and coupling ports stays below 1.5 dB over the entire E-band, while the respective phase difference ranges only between 87 degrees and 91 degrees despite the challenges of additive manufacturing in such frequency regions.
引用
收藏
页码:580 / 582
页数:3
相关论文
共 15 条
[1]  
[Anonymous], ADDITIVE MANUFACTURI
[2]  
Bozzi M., 2007, P TELSIKS SEP
[3]   Development of a low cost microwave mixer using a broad-band substrate integrated waveguide (SIW) coupler [J].
Chen, JX ;
Hong, W ;
Hao, ZC ;
Li, H ;
Wu, K .
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2006, 16 (02) :84-86
[4]  
Engen G.F. et Beatty., 1959, IEEE T MICROW THEORY, V7, P351
[5]   Accurate and efficient design technique for wideband substrate integrated waveguide directional couplers [J].
Han, Liang ;
Wu, Ke ;
Chen, Xiao-Ping ;
He, Fanfan .
INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2012, 22 (02) :248-259
[6]   Half-mode substrate integrated waveguide (HMSIW) double-slot coupler [J].
Liu, B. ;
Hong, W. ;
Zhang, Y. ;
Chen, J. X. ;
Wu, K. .
ELECTRONICS LETTERS, 2007, 43 (02) :113-114
[7]  
Lomakin K, 2018, EUR MICROW CONF, P1409
[8]   3D Printed Slotted Rectangular Hollow Waveguides [J].
Lomakin, K. ;
Herold, S. ;
Simon, D. ;
Sippel, M. ;
Sion, A. ;
Vossiek, M. ;
Helmreich, K. ;
Gold, G. .
2019 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2019, :342-345
[9]  
Lomakin K., 2019, IEEE T COMPON PACKAG
[10]   THE SHORT-SLOT HYBRID JUNCTION [J].
RIBLET, HJ .
PROCEEDINGS OF THE INSTITUTE OF RADIO ENGINEERS, 1952, 40 (02) :180-184