Dedicated spectrometers based on diffractive optics: design, modelling and evaluation

The described design of diffractive optical elements for low cost IR-spectrometers gives a built-in wavelength reference and allows 'spectral arithmetic' to be implemented in the optical performance of the DOE. The diffractive element combines the function of the lenses and the grating and eliminates the need for alignment of those components in the standard scanned grating spectrometer design. The element gives out a set of foci, each with one spectral component, which are scanned across a detector, thus relaxing the demands for scan angle control. It can thus be regarded as an alternative solution to a beam splitter and band pass filter instrument. Software tools have been designed to ease the adaptation of the design to different applications. To model the performance of the spectrometers we have implemented a scalar Rayleigh-Sommerfeldt diffraction model. The gold-coated elements are produced by injection moulding using a compact disc (CD) moulding technique and mould inlays mastered by e-beam lithography. The optimized selection of wavelength bands and the classification of the measured signal use a combination of principal component analysis and robust statistical methods. Typical applications will be material characterization of recycled plastics and gas monitoring. Spectrometers for two different applications have been built and tested. Comparisons between the design goals and the measured performance have been made and show good agreements.