Effect of Collars on the Downstream Movement of the Maximum Scour Depth Location Around Bridge Abutments and Piers

被引:8
作者
Kumcu, Serife Yurdagul [1 ]
Kokpinar, Mehmet Ali [2 ]
Gogus, Mustafa [3 ]
机构
[1] Necmettin Erbakan Univ, Civil Engn Dept, Hydraul Div, Konya, Turkey
[2] TED Univ, Civil Engn Dept, Ankara, Turkey
[3] Cankaya Univ, Civil Engn Dept, Ankara, Turkey
关键词
Shift distance; Local scour; Collar; Scour protection; Abutment; Pier; Maximum scour depth location; Deviation angle; LOCAL SCOUR;
D O I
10.1007/s40996-021-00654-3
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A detailed investigation has been conducted to study the shift location of the point of the maximum scour depth for both bridge abutment-collar and pier-collar arrangements. In the present study, an experimental program has been conducted for abutment-collar arrangements and additionally, the data obtained from the literature for the pier-collar arrangements have been revisited and analyzed to complement the framework of this study. For the abutment-collar arrangements, a series of experiments under clear-water conditions were carried out for different abutment lengths with fixed values of collar location and collar width. For pier-collar arrangements, data used from the literature have been involved constant pier diameter with various collar sizes at various elevations. To describe the locations of these maximum scour depths, their coordinates with respect to the location of the abutment or the pier were obtained. Results from this investigation showed that when a collar placed on or below the bed level was used as a countermeasure against scouring, either on an abutment or on a pier, it was observed that the maximum scour depth was routed downstream of the bridge structure.
引用
收藏
页码:1421 / 1432
页数:12
相关论文
共 26 条
[1]   SCOUR PROTECTION AT BRIDGE PIERS [J].
CHIEW, YM .
JOURNAL OF HYDRAULIC ENGINEERING-ASCE, 1992, 118 (09) :1260-1269
[2]   Breaching of Bridge Abutments and Scour at Exposed Abutment Columns [J].
Ettema, Robert ;
Bergendahl, Bart S. ;
Yorozuya, Atsuhiro ;
Idil-Bektur, Pelin .
JOURNAL OF HYDRAULIC ENGINEERING, 2016, 142 (10)
[3]  
Garcia M.H., 2007, ASCE Manuals and Reports on Engineering Practice No.110
[4]  
Gogus M, 2004, P 2 INT C FLUV HYDR, P609
[5]   Scour around an Erodible Abutment with Riprap Apron over Time [J].
Hong, Seung Ho ;
Abid, Irfan .
JOURNAL OF HYDRAULIC ENGINEERING, 2019, 145 (06)
[6]   Scour and three-dimensional flow field measurement around short vertical-wall abutment protected by collar [J].
Karami, Hojat ;
Hosseinjanzadeh, Hossein ;
Hosseini, Khosrow ;
Ardeshir, Abdollah .
KSCE JOURNAL OF CIVIL ENGINEERING, 2018, 22 (01) :141-152
[7]  
Kas I, 2005, THESIS GAZI U ANKARA
[8]  
Kayaturk S.Y., 2004, 2 INT C SCOUR ER, P180
[9]  
KAYATURK SY, 2005, THESIS MIDDLE E TECH
[10]   Effect of trapezoidal collars as a scour countermeasure around wing-wall abutments [J].
Khosravinia, Payam ;
Malekpour, Amir ;
Hosseinzadehdalir, Ali ;
Farsadizadeh, Davod .
WATER SCIENCE AND ENGINEERING, 2018, 11 (01) :53-60