Effect of rolling orientation on the mechanical properties and crystallographic texture of 2195 aluminum-lithium alloy

被引：7
作者：
Trinca, M
Avalino, A
Garmestani, H
Foyos, J
Lee, EW
Es-Said, OS
机构：
[1] Loyola Marymount Univ, NSF, Res Experience Undergrad Program, Los Angeles, CA 90045 USA
[2] FSU, Coll Engn, FAMU, MARTECH,Ctr Mat Res & Technol, Tallahassee, FL 32310 USA
[3] USN, Air Warfare Ctr, Air Syst Command, Patuxent River, MD 20670 USA
来源：
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3 | 2000年 / 331-3卷
关键词：
Al-Li; anisotropy; crystallographic texture; off-axis rolling;
D O I：
10.4028/www.scientific.net/MSF.331-337.849
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
As-received sheets of 2195 aluminum-lithium alloy in the F temper of 3.18mm were cut at 0 degrees, 45 degrees, and 90 degrees with respect to the rolling direction. The sheets were rolled at 24% reduction in thickness along these three directions after solution treatment and prior to aging. The alloy was solution treated at 507 degrees C/30 minutes and aged at 143 degrees C/36 hours. The mechanical strength and anisotropy significantly increased. The crystallographic texture characteristics of as-received and rolled samples were determined and related to the changes in mechanical properties.
引用
收藏
页码：849 / 854
页数：6
相关论文
共 50 条
[41]   Crystallographic texture evolution in Ti-35Nb alloy deformed by cold rolling [J].
Hayama, Alexandra O. F. ;
Lopes, Juliana F. S. C. ;
Gomes da Silva, Marcelo J. ;
Abreu, Hamilton F. G. ;
Caram, Rubens .
MATERIALS & DESIGN, 2014, 60 :653-660
[42]   Effect of aging treatment on microstructures and properties of 2050 aluminum lithium alloy [J].
Li H.-Y. ;
Wang X.-Y. ;
Yu W.-C. .
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2018, 28 (12) :2433-2440
[43]   Effect of thermomechanical processing on texture and mechanical properties of Al-Cu-Li alloy plate [J].
Cho, A. ;
Long, Z. ;
Lisagor, B. ;
Bales, T. ;
Domack, M. ;
Wagner, J. .
ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 :1585-1590
[44]   Effect of the Crystallographic Texture in the α Phase on the Anisotropy of the Properties of Pseudo-α and (α plus β) Titanium Alloy Sheets [J].
Isaenkova, M. G. ;
Krymskaya, O. A. ;
Babich, Ya A. ;
Medvedev, P. N. .
RUSSIAN METALLURGY, 2021, 2021 (04) :430-436
[45]   Evolution of microstructure and crystallographic texture of microalloyed steel during warm rolling in dual phase region and their influence on mechanical properties [J].
Shen, X. J. ;
Tang, S. ;
Wu, Y. J. ;
Yang, X. L. ;
Chen, J. ;
Liu, Z. Y. ;
Misra, R. D. K. ;
Wang, G. D. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 685 :194-204
[46]   Effect of Microstructure and Texture on Anisotropy and Mechanical Properties of SAE 970X Steel Under Hot Rolling [J].
Masoumi, Mohammad ;
Mohtadi-Bonab, M. A. ;
Gomes de Abreu, Hamilton Ferreira .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (07) :2847-2854
[47]   Effect of Microstructure and Texture on Anisotropy and Mechanical Properties of SAE 970X Steel Under Hot Rolling [J].
Mohammad Masoumi ;
M. A. Mohtadi-Bonab ;
Hamilton Ferreira Gomes de Abreu .
Journal of Materials Engineering and Performance, 2016, 25 :2847-2854
[48]   Anisotropy of elastocaloric cooling effect in equal atomic ratio NiTi alloy with crystallographic texture [J].
Pang, Guoxin ;
He, Zhubin ;
Lin, Yanli ;
Zu, Yufei ;
Li, Xifeng ;
Fu, Xuesong ;
Zhou, Wenlong ;
Chen, Guoqing .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 :1128-1135
[49]   Crystallographic Texture Evolution of Aluminum Alloy 3104 in the Drawn and Wall Ironing (DWI) Process [J].
Teixeira Martins, Andre Luis ;
Couto, Antonio Augusto ;
de Lima, Nelson Batista ;
Costa Almeida, Gisele Fabiane .
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22
[50]   The Effects of Reduction and Thermal Treatment on the Recrystallization and Crystallographic Texture Evolution of 5182 Aluminum Alloy [J].
Papadopoulou, Sofia ;
Kontopoulou, Athina ;
Gavalas, Evangelos ;
Papaefthymiou, Spyros .
METALS, 2020, 10 (10) :1-13
12345