Development of in-process tool wear monitoring system for CNC turning

被引:14
作者
Moriwaki, T
Shibasaka, T
Tanghtsitcharoen, S
机构
[1] Kobe Univ, Fac Mech Engn, Kobe, Hyogo 6578501, Japan
[2] Kobe Univ, Grad Sch Sci & Technol, Kobe, Hyogo 6578501, Japan
关键词
tool wear; cutting force; turning; CNC turning machine; nominal specific cutting resistance;
D O I
10.1299/jsmec.47.933
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The aim of this research is to develop an in-process tool wear monitoring system for CNC turning machine. The exponential decay function is employed to represent the relation between the nominal specific cutting resistance and feed rate. An index value a in the exponential decay function is defined to estimate the flank wear, which is equivalent to the rate of increase in the nominal specific cutting resistance at zero feed rate as compared to that at infinite feed rate. In order to obtain the characteristic value a, the additional cutting cycles is proposed here to alter the feed rate deliberately during the normal cutting cycle to measure the cutting forces and identify the rate of increase in the nominal specific Cutting resistance at smaller feed rates. Series of cutting tests were carried out to estimate the flank wear, and it is proved that the index mentioned above can be a good measure of tool wear, even though the depths of cut, the cutting speeds and the cutting tools, as well as the work materials are different.
引用
收藏
页码:933 / 938
页数:6
相关论文
共 50 条
[21]   Fuzzy logic based in-process tool-wear monitoring system in face milling operations [J].
J.C. Chen ;
V. Susanto .
The International Journal of Advanced Manufacturing Technology, 2003, 21 (3) :186-192
[22]   Monitoring of tool wear states in turning based on wavelet analysis [J].
Gong, WG ;
Obikawa, T ;
Shirakashi, T .
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 1997, 40 (03) :447-453
[23]   An approach based on current and sound signals for in-process tool wear monitoring [J].
Salgado, D. R. ;
Alonso, F. J. .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (14) :2140-2152
[24]   In-process Monitoring of Tool Behavior and Tool Wear in End Milling by Use of Projection Image [J].
Yoshimitsu, Shinichi ;
Satonaka, Shinobu ;
Kawano, Yoshihiro ;
Iwamoto, Chihiro ;
Zuo, Dunwen ;
Yamashita, Shunichi .
EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 :433-+
[25]   In-Process Prediction of Straightness in CNC Turning by Using Wavelet Transform [J].
Sassantiwong, Mumin ;
Tangjitsitcharoen, Somkiat .
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON GREEN MATERIALS AND ENVIRONMENTAL ENGINEERING (GMEE 2015), 2016, 35 :199-203
[26]   Correlating tool wear and surface integrity of a CNC turning process using Naive based classifiers [J].
Mandal, Nirmal Kumar ;
Singh, Nirmal Kumar ;
Tarafdar, Najimul Hosen ;
Hazra, Anirban .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2021, 235 (05) :772-781
[27]   Development of a Simultaneous Monitoring System for Tool Flank Wear and Surface Roughness in Dry Steel Turning [J].
Salgado, D. R. ;
Cambero, I. ;
Herrera, J. M. ;
Alonso, F. J. .
4TH MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC 2011), 2012, 1431 :391-398
[28]   EXPERIMENTATION AND PREDICTION OF THE WEAR OF A CUTTING TOOL IN TURNING PROCESS [J].
Merzoug, M. ;
Benamara, N. ;
Boulenouar, A. ;
Bouchouicha, B. ;
Mazari, M. .
ARCHIVES OF METALLURGY AND MATERIALS, 2018, 63 (02) :563-573
[29]   An artificial-neural-networks-based in-process tool wear prediction system in milling operations [J].
Jacob C. Chen ;
Joseph C. Chen .
The International Journal of Advanced Manufacturing Technology, 2005, 25 :427-434
[30]   An artificial-neural-networks-based in-process tool wear prediction system in milling operations [J].
Chen, JC ;
Chen, JC .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 25 (5-6) :427-434