Investigation of the wear properties of ceramic total hip prostheses made of alumina and zirconia combination: A hip simulator study

被引：2
|
作者：
Ueno, M
Ikeuchi, K
机构：
[1] Kyocera Corp, Fushimi Ku, Kyoto, Japan
[2] Kyoto Univ, Sakyo Ku, Kyoto 60601, Japan
来源：
BIOCERAMICS 15 | 2003年 / 240-2卷
关键词：
zirconia; alumina; total hip prostheses; hip simulator; wear; clinical;
D O I：
10.4028/www.scientific.net/KEM.240-242.809
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
引用
收藏
页码：809 / 812
页数：4
相关论文
共 50 条
  • [31] Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested In a physiological hip joint simulator
    Firkins, PJ
    Tipper, JL
    Saadatzadeh, MR
    Ingham, E
    Stone, MH
    Farrar, R
    Fisher, J
    BIO-MEDICAL MATERIALS AND ENGINEERING, 2001, 11 (02) : 143 - 157
  • [32] Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model
    Oonishi, H
    Clarke, IC
    Good, V
    Amino, H
    Ueno, M
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2004, 70A (04) : 523 - 532
  • [33] Optimal Sterilization Method for the Zirconia/Alumina Composites Used for Total Hip Replacements
    Nam, Kwang Woo
    Yoo, Jeong Joon
    Koo, Kyung-Hoi
    Yoon, Kang Sup
    Kim, Hee Joong
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2009, 90B (02) : 962 - 966
  • [34] Influence of Metallic Deposition on Ceramic Femoral Heads on the Wear Behavior of Artificial Hip Joints: A Simulator Study
    Hembus, Jessica
    Roessler, Lisa
    Jackszis, Mario
    Klinder, Annett
    Bader, Rainer
    Zietz, Carmen
    MATERIALS, 2020, 13 (16)
  • [35] Failures of yttria-stabilised tetragonal zirconia:: 52 retrieved ceramic femoral heads of total hip prostheses
    Fernandez-Fairen, M.
    Sala, P.
    Gil, F. J.
    BIO-MEDICAL MATERIALS AND ENGINEERING, 2006, 16 (06) : 415 - 422
  • [36] Wear of HIPed and non-HIPed alumina-alumina hip joints under standard and severe simulator testing conditions
    Nevelos, JE
    Ingham, E
    Doyle, C
    Nevelos, AB
    Fisher, J
    BIOMATERIALS, 2001, 22 (16) : 2191 - 2197
  • [37] The influence of acetabular cup angle on the wear of “BIOLOX Forte” alumina ceramic bearing couples in a hip joint simulator
    J. E. Nevelos
    E. Ingham
    C. Doyle
    A. B. Nevelos
    J. Fisher
    Journal of Materials Science: Materials in Medicine, 2001, 12 : 141 - 144
  • [38] The influence of acetabular cup angle on the wear of "BIOLOX Forte" alumina ceramic bearing couples in a hip joint simulator
    Nevelos, JE
    Ingham, E
    Doyle, C
    Nevelos, AB
    Fisher, J
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2001, 12 (02) : 141 - 144
  • [39] Histochemical identification of wear debris released by alumina-on-alumina hip prostheses in the periprosthetic tissues
    Rony, Louis
    Pascaretti-Grizon, Florence
    Hubert, Laurent
    Chappard, Daniel
    ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH, 2021, 107 (01)
  • [40] Reduction of wear in total hip replacement prostheses by amorphous diamond coatings
    Lappalainen, R
    Selenius, M
    Anttila, A
    Konttinen, YT
    Santavirta, SS
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2003, 66B (01) : 410 - 413
12345