Study on fusibility of coal ash rich in sodium and sulfur by synthetic ash under different atmospheres

被引:65
作者
Chen, Xiao-Dong [1 ,2 ]
Kong, Ling-Xue [1 ]
Bai, Jin [1 ]
Bai, Zong-Qing [1 ]
Li, Wen [1 ]
机构
[1] Chinese Acad Sci, Inst Coal Chem, State Key Lab Coal Convers, Taiyuan 030001, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
基金
中国国家自然科学基金;
关键词
Ash fusion temperature; Sodium and sulfur; Sodium sulfate; Reducing and oxidizing atmosphere; ZHUNDONG COAL; COMBUSTION; TEMPERATURE; LIGNITE; DEPOSITION; XINJIANG; FLOW;
D O I
10.1016/j.fuel.2017.04.001
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Coal ash fusibility is the key parameter related with ash fouling and slagging in boiler and gasifier. The influences of major compositions in coal ash on fusibility are well known, but the ash rich in sodium and sulfur, such as Zhundong coal, is lack of study. Meanwhile, the sodium and sulfur in Zhundong coal lead to severe slagging and ash deposition during thermal utilization. In order to reveal the behavior of sodium and sulfur in ash and its effect on ash fusibility under different atmospheres, two synthetic ashes rich in sodium and sulfur were prepared. Fe2O3 was not included in order to shield its effect on ash fusibility by atmosphere. The results show that ash fusion temperatures (AFTs) of coal ash rich in sodium and sulfur under oxidizing atmosphere are higher than that under reducing atmosphere. The mineral transformation experiments reveal that sodium has an obvious effect on decreasing AFTs under reducing atmosphere due to the formation of fusible Na-containing aluminosilicates. However, under oxidizing atmosphere, a majority of sodium transformed into sodium sulfate (Na2SO4), which was separated out from the slags above 1250 degrees C, leading to a decrease of sodium content in coal ash. The formation of sodium sulfate under the oxidizing atmosphere also depends on the total content of SiO2 and Al2O3 in coal ash. The formation condition of sodium sulfate was further proposed in a ternary diagram. The conclusions supply a theoretical support to evaluate the fusibility of ash rich in sodium and sulfur properly, and also help to prevent slagging and ash deposition by sodium sulfate. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:175 / 183
页数:9
相关论文
共 32 条
[1]   Research on sodium removal from Zhundong coal [J].
Chen, Chuan ;
Zhang, Shouyu ;
Shi, Dazhong ;
Lv, Junfu ;
Liu, Dahai ;
Guo, Xi ;
Dong, Aixia ;
Xiong, Shaowu .
RESOURCES AND SUSTAINABLE DEVELOPMENT, PTS 1-4, 2013, 734-737 :614-+
[2]  
[陈川 Chen Chuan], 2013, [燃料化学学报, Journal of Fuel Chemistry and Technology], V41, P832
[3]  
Chen Xiao-dong, 2016, Journal of Fuel Chemistry and Technology, V44, P263, DOI 10.1016/S1872-5813(16)30015-9
[4]   Characteristics of Ash Deposits in a Pulverized Lignite Coal-Fired Boiler and the Mass Flow of Major Ash-Forming Inorganic Elements [J].
Dai, Bai-Qian ;
Low, Fiona ;
De Girolamo, Anthony ;
Wu, Xiaojiang ;
Zhang, Lian .
ENERGY & FUELS, 2013, 27 (10) :6198-6211
[5]   Combustion performance and sodium transformation of high-sodium ZhunDong coal during chemical looping combustion with hematite as oxygen carrier [J].
Ge, Huijun ;
Shen, Laihong ;
Gu, Haiming ;
Song, Tao ;
Jiang, Shouxi .
FUEL, 2015, 159 :107-117
[6]  
Gupta R., 1999, Impact of mineral impurities in solid fuel combustion
[7]  
[韩克鑫 Han Kexin], 2015, [燃料化学学报, Journal of Fuel Chemistry and Technology], V43, P22
[8]   Phase diagram approach to the fluxing effect of additions of CaCO3 on Australian coal ashes [J].
Hurst, HJ ;
Novak, F ;
Patterson, JH .
ENERGY & FUELS, 1996, 10 (06) :1215-1219
[9]   Effect of temperature and pressure on the mineralogical and fusion characteristics of Jincheng coal ash in simulated combustion and gasification environments [J].
Jing, Nijie ;
Wang, Qinhui ;
Cheng, Leming ;
Luo, Zhongyang ;
Cen, Kefa ;
Zhang, Dongke .
FUEL, 2013, 104 :647-655
[10]   Influence of gas environment on reactions between sodium and silicon minerals during gasification of low-rank coal [J].
Kosminski, A. ;
Ross, D. P. ;
Agnew, J. B. .
FUEL PROCESSING TECHNOLOGY, 2006, 87 (11) :953-962