THE DEVELOPMENT OF EXPLOSIVE METALWORKING IN POLAND

The author coordinated the research in Poland by the collaboration with civil and military scientific and research centres. In result they elaborated detonation process of spraying coats designed and constructed stands equipped with detonative devices, they also elaborated the techniques of basic coating parameter measurement and built devices for commercial and scientific services. In the research the author's achievements within the range of explosive welding have been used. The experience of the scientific teams was very effective. It was observed that many phenomena that take place in the processes of detonative layer coating and explosive welding are the same. In order to obtain a required connection the plastic strain of the connected material surfaces has to be achieved and cumulative flows have to be formed. There are a similar range of the connecting process conditions and the mechanisms of plastic strain. The highest connection strength is obtained when an intermediate zone is formed. The zone has to be composed of the two connected materials. The intermediate layer is formed as a result of mechanical alloying of the materials due to large plastic strain. The plastic strain leads to forming meta-stable phases that have properties of pseudo solid solution, chemical compounds, intermetallic phases and fragmentation corresponding to nanomaterials and amorphous states.