Preliminary economic assessment of the use of waste frying oils for biodiesel production in Beirut, Lebanon

被引:34
作者
Fawaz, Elyssa G. [1 ]
Salam, Darine A. [1 ]
机构
[1] Amer Univ Beirut, Fac Engn & Architecture, Dept Civil & Environm Engn, POB 11-0236, Beirut, Lebanon
关键词
Biodiesel production; Waste frying oils; Economic assessment; Lebanon; LIFE-CYCLE ASSESSMENT; VEGETABLE-OIL; COOKING OIL; METHYL-ESTER; ENERGY; TRANSESTERIFICATION; OPTIMIZATION; QUALITY; DIESEL; FUEL;
D O I
10.1016/j.scitotenv.2018.04.421
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this study, a method for assessing the costs of biodiesel production from waste frying oils in Beirut, Lebanon, was investigated with the aim of developing an economic evaluation of this alternative. A hundred restaurant and hotel enterprises in Beirut were surveyed for promoting them in participating in the biodiesel supply chain, and for data collection on waste frying oils generation, disposal methods and frequency, and acquisition cost. Also, waste frying oils were collected and converted into biodiesel using a one-step base catalyzed transesterification process. Physicochemical characteristics of the produced biodiesel were conforming to international standards. Data produced from laboratory scale conversion of waste frying oils to biodiesel, as well as data collected from the only biodiesel plant in Lebanon was used to determine the production cost of biodiesel. Geographic Information System was used to propose a real-time vehicle routing model to establish the logistics costs associated with waste frying oils collection. Comparing scenarios of the configuration collection network of waste frying oils, and using medium-duty commercial vehicles for collection, a logistics cost of US$/L 0.08 was optimally reached. For the calculation of the total cost of biodiesel production, the minimum, average, and maximum values for the non-fixed cost variables were considered emerging 81 scenarios for possible biodiesel costs. These were compared with information on the commercialization of diesel in Lebanon for the years 2011 through 2017. Although competitive with petroleum diesel for years 2011 to 2014, the total biodiesel cost presented less tolerance to declining diesel prices in the recent years. Sensitivity analysis demonstrated that the acquisition cost of waste frying oils is the key factor affecting the overall cost of biodiesel production. The results of this study validate the economic feasibility of waste frying oils' biodiesel production in the studied urban area upon enforcement of low waste frying oils' acquisition costs, and can help spur food service enterprises to become suppliers of biodiesel production feedstock and support a healthy development of the biodiesel industry in Lebanon. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:1230 / 1240
页数:11
相关论文
共 75 条
[1]   RETRACTED: The effects of using biodiesel on CI (compression ignition) engine and optimization of its production by using response surface methodology (Retracted article. See vol. 261, 2022) [J].
Abuhabaya, Abdullah ;
Fieldhouse, John ;
Brown, David .
ENERGY, 2013, 59 :56-62
[2]   Parametric study of the alkali catalyzed transesterification of waste frying oil for Biodiesel production [J].
Al-Hamamre, Zayed ;
Yamin, Jehad .
ENERGY CONVERSION AND MANAGEMENT, 2014, 79 :246-254
[3]   Continuous production of biodiesel from fat extracted from lamb meat in supercritical CO2 media [J].
Al-Zuhair, Sulaiman ;
Hussein, Ahmedin ;
Al-Marzouqi, Ali H. ;
Hashim, Isameldin .
BIOCHEMICAL ENGINEERING JOURNAL, 2012, 60 :106-110
[4]  
Alam M., 2006, International Journal of Engine Research, V7, P503, DOI 10.1243/14680874JER01506
[5]   Transesterification of waste frying oil using a zinc aluminate catalyst [J].
Alves, C. T. ;
Oliveira, A. ;
Carneiro, S. A. V. ;
Silva, A. G. ;
Andrade, H. M. C. ;
Vieira de Melo, S. A. B. ;
Torres, E. A. .
FUEL PROCESSING TECHNOLOGY, 2013, 106 :102-107
[6]  
[Anonymous], 2014, D675112 ASTM
[7]  
[Anonymous], 2015, D4052 ASTM
[8]  
[Anonymous], 2003, 141032003 ENB
[9]  
[Anonymous], 2016, D93 ASTM
[10]  
[Anonymous], 2017, D445 ASTM