Effects of processing parameters on liquation cracking of 6005A alloy weldments

被引：2
|
作者：
Choi, JH
Lee, DH
Kim, J
Shin, DH
Kim, YS
机构：
[1] Hongik Univ, Dept Met & Mat Sci, Seoul 121791, South Korea
[2] Dongyang Gangchul, R&D Ctr, Taejon 306020, South Korea
[3] Hanyang Univ, Dept Met & Mat Engn, Ansam 425791, South Korea
来源：
METALS AND MATERIALS-KOREA | 2000年 / 6卷 / 04期
关键词：
6005A aluminum alloy; extrusion; weldment; liquation cracking;
D O I：
10.1007/BF03028088
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of the characteristic microstructure developed in extruded 6005A alloys on tensile properties, fatigue strength, and liquation cracking in the heat affected zone of weldments were investigated, An insitu observation of the grain growth occurring in the sample was made with an optical microscope with a hot stage to determine the temperature of the excessive grain growth during extrusion. The extruded samples were heat heated under various conditions and welded using a gas metal arc welding process. The results indicated that liquation occurred mainly at coarse grain boundaries and significantly influencing the mechanical properties of the joint.
引用
收藏
页码：395 / 399
页数：5
相关论文
共 50 条
  • [41] Optimization of Hot Extrusion Process Parameters of Mg97Y2Zn1 Alloy Based on the Processing Maps
    Bin Chen
    Wei-min Zhou
    Xiao-ling Li
    Chen Lu
    Journal of Materials Engineering and Performance, 2013, 22 : 2528 - 2533
  • [42] Optimization of Hot Extrusion Process Parameters of Mg97Y2Zn1 Alloy Based on the Processing Maps
    Chen, Bin
    Zhou, Wei-min
    Li, Xiao-ling
    Lu, Chen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (09) : 2528 - 2533
  • [43] The effect of Nd:YAG laser parameters on the microstructure, hot cracking susceptibility and elemental evaporation of surface melted AZ80 magnesium-based alloy
    Ahmadi, Narges
    Naffakh-Moosavy, Homam
    Hadavi, Seyed Mohammad Mahdi
    Bagheri, Fatemeh
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 2459 - 2474
  • [44] Hot deformation behavior and optimization of processing parameters of a high-strength Mg-Gd-Nd-Zn-Sn-Zr alloy
    Yan, Zehua
    Yu, Yandong
    Qian, Jiahao
    Sang, Yanchao
    Yao, Yiming
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (10) : 2435 - 2445
  • [45] Hot deformation behavior and optimization of processing parameters of a high-strength Mg-Gd-Nd-Zn-Sn-Zr alloy
    Zehua Yan
    Yandong Yu
    Jiahao Qian
    Yanchao Sang
    Yiming Yao
    Transactions of the Indian Institute of Metals, 2020, 73 : 2435 - 2445
  • [46] Effects of Formulation and Processing Parameters on the Morphology of Extruded Polypropylene- (Waste Ground Rubber Tire Powder) Foams
    Xin, Zhen Xiang
    Zhang, Zhen Xiu
    Pal, Kaushik
    Lu, Bing Xue
    Deng, Xu
    Lee, Sung Hyo
    Kim, Jin Kuk
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2009, 15 (04) : 266 - 274
  • [47] Effects of technical parameters of continuous semisolid rolling on microstructure and mechanical properties of Mg-3Sn-1Mn alloy
    Guan, Ren-guo
    Zhao, Zhan-yong
    Chao, Run-ze
    Zhao, Hong-liang
    Liu, Chun-ming
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (01) : 73 - 79
  • [48] Effects of extrusion parameters on the microstructure, corrosion resistance, and mechanical properties of biodegradable Mg-Zn-Gd-Y-Zr alloy
    Liu, Ya
    Wen, Jiuba
    Li, Huan
    He, Junguang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 891
  • [49] Effects of Clostridium autoethanogenum protein inclusion levels and processing parameters on the physical properties of low-starch extruded floating feed
    Ma, Shifeng
    Wang, Hao
    Yang, Jie
    Li, Junguo
    Xue, Min
    Cheng, Hongyuan
    Zou, Fangqi
    Blecker, Christophe
    AQUACULTURE REPORTS, 2022, 23
  • [50] Feed processing effects on digestibility, palatability, excreta fermentation products and blood parameters in blue-fronted amazon parrots (Amazona aestiva)†
    Di Santo, Ludmilla G.
    Braos, Lucas B.
    Kawanami, Aline E.
    Oliveira, Juliana P.
    Cruz, Nathan R. N.
    Mendonca, Fernanda S.
    Peixoto, Mayara C.
    Carciofi, Aulus C.
    JOURNAL OF ANIMAL PHYSIOLOGY AND ANIMAL NUTRITION, 2019, 103 (01) : 339 - 353
12345