Improved plasticity of Mg-Al-Zn alloy by electropulsing tension

被引：50
|
作者：
Xu, Qing [1 ]
Guan, Lei [1 ]
Jiang, Yanbin [1 ]
Tang, Guoyi [1 ]
Wang, Shaonan [1 ]
机构：
[1] Tsinghua Univ, Grad Sch Shenzhen, Adv Mat Inst, Shenzhen 518055, Peoples R China
来源：
MATERIALS LETTERS | 2010年 / 64卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Magnesium alloys; Electropulsing; Mechanical properties; Microstructure; Dynamic recrystallization; AGED MG-9AL-1ZN ALLOY; DYNAMIC RECRYSTALLIZATION; MAGNESIUM ALLOYS; DEFORMATION; BEHAVIOR; MICROSTRUCTURE; TEMPERATURE; MECHANISMS; PHASE; STRIP;
D O I：
10.1016/j.matlet.2010.02.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of electropulsing tension (ET) on the elongation to failure and microstructure of Mg-3A1-1Zn (AZ31) alloy was studied. It was found that electropulsing increased the elongation to failure dramatically at a high strain rate of 2.5 x 10(-2) s(-1), compared with the non-ET sample. The mechanism for increasing the elongation was proposed mainly based on dynamic recrystallization (DRX). The results in this investigation indicated that an ideal improvement in plasticity and fine equiaxial grains were obtained at a low temperature and a high strain rate due to the coupling of the thermal and athermal effects of ET. It is different from conventional theories. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：1085 / 1087
页数：3
相关论文
共 50 条
  • [31] Texture Development and Deformation Behavior of a Statically Recrystallized Mg-Al-Zn Alloy Sheet
    Shin, Beomsoo
    Kang, Heon
    Bae, Donghyun
    METALS AND MATERIALS INTERNATIONAL, 2012, 18 (01) : 23 - 27
  • [32] Microstructure and mechanical properties of multi-directionally forged Mg-Al-Zn alloy
    Miura, H.
    Maruoka, T.
    Yang, X.
    Jonas, J. J.
    SCRIPTA MATERIALIA, 2012, 66 (01) : 49 - 51
  • [33] STRENGTHENING MG-AL-ZN ALLOY BY REPETITIVE OBLIQUE SHEAR STRAIN
    Mukai, Toshiji
    Somekawa, Hidetoshi
    Singh, Alok
    Inoue, Tadanobu
    MAGNESIUM TECHNOLOGY 2011, 2011, : 211 - 214
  • [34] Strengthening and ductilization mechanisms of friction stir processed cast Mg-Al-Zn alloy
    Sharahi, H. Jiryaei
    Pouranvari, M.
    Movahedi, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 781
  • [35] Improved strength of Al-Zn-Mg-Cu alloy USW joints by synchronously applying electropulsing current
    Liang, Zhimin
    Sun, Zhuobin
    Wang, Guanying
    Wang, Liwei
    Liu, Suyun
    Yang, Xiao
    Liu, Dan
    Liang, Yongmei
    Wang, Dianlong
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 99 : 254 - 259
  • [36] Low-cost and high-strength Mg-Al-Ca-Zn-Mn wrought alloy with balanced ductility
    Yang, Kun
    Pan, Hucheng
    Du, Sen
    Li, Man
    Li, Jingren
    Xie, Hongbo
    Huang, Qiuyan
    Mo, Huajun
    Qin, Gaowu
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2022, 29 (07) : 1396 - 1405
  • [37] Study on Bulk Texture and Mechanical Properties of As-Extruded Wide Mg-Al-Zn Alloy Sheets with Different Al Addition
    Li, Yu-Qing
    Xu, Da-Ye
    Zha, Min
    Chen, Dong-Feng
    Liu, Yun-Tao
    Li, Mei-Juan
    Sun, Kai
    Zhu, Gui-Jie
    Wang, Si-Qing
    Wang, Tong
    Gao, Jian-Bo
    Liu, Xiao-Long
    MATERIALS, 2022, 15 (12)
  • [38] Effect of solidification rate and Al content on solid solution in Mg-Al-Zn alloy
    Su, Juan
    Guo, Feng
    Guo Haotian
    Gao Xiaobo
    Feng Haiquan
    MATERIALS SCIENCE AND TECHNOLOGY, 2021, 37 (05) : 535 - 544
  • [39] Hot deformation behaviour of Mg-Al-Zn alloys
    Zhou, S. -S.
    Zhou, H. -F.
    Shang, S. -J.
    Li, J. -C.
    Kang, G. -F.
    Deng, K. -K.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 654 - 660
  • [40] Role of grain boundary segregation on microstructural development in basal-textured Mg-Al-Zn alloy sheet
    Nakata, T.
    Li, Z. H.
    Sasaki, T. T.
    Hono, K.
    Kamado, S.
    SCRIPTA MATERIALIA, 2022, 218
12345