Kinetics of the Static Recrystallization of Austenite in Niobium-Microalloyed Pipe Steels

被引：5

作者：

Chastukhin, A. V. ^{[1
]}

Ringinen, D. A. ^{[1
]}

Khadeev, G. E. ^{[1
]}

Efron, L. I. ^{[2
]}

机构：

[1] Vyksa Met Plant, Vyksa, Nizhny Novgorod, Russia

[2] United Met Co, Moscow, Russia

来源：

METALLURGIST | 2016年 / 59卷 / 11-12期

关键词：

controlled rolling; static recrystallization; pipe steel; niobium; austenite; modeling; METADYNAMIC RECRYSTALLIZATION; MICROSTRUCTURE EVOLUTION; HOT DEFORMATION; MODEL;

D O I：

10.1007/s11015-016-0234-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A method is described for experimentally determining the parameters of a model of the kinetics of static recrystallization. Use of the method ensures a close correlation between calculated and experimental values of the percentage of recrystallized metal (R = 0.97). It is shown that the probability of the occurrence of partial recrystallization between roughing passes must be accounted for in order to evaluate the completeness with which static recrystallization takes place during multipass rolling. It was found that the kinetics of static recrystallization of niobium-microalloyed pipe steels depends on their chemical composition. A convenient software tool, HRRM (Hot Rolling Recrystallization Model), has been created to develop new rough-rolling regimes and correct existing such regimes for the controlled rolling of high-strength microalloyed steels.

引用

页码：1180 / 1187

页数：8

共 14 条

[1] The dynamic, static and metadynamic recrystallization of a Nb-microalloyed steel [J].

Cho, SH ;

Kang, KB ;

Jonas, JJ .

ISIJ INTERNATIONAL, 2001, 41 (01) :63-69

[2] Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation [J].

Dehghan-Manshadi, A. ;

Barnett, M. R. ;

Hodgson, P. D. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2) :664-672

[3]

Efron L. I., 2012, Physical Metallurgy in Large Metallurgy. Pipe Steels

[4] The kinetics of static recrystallization in microalloyed hypereutectoid steels [J].

Elwazri, AM ;

Essadiqi, E ;

Yue, S .

ISIJ INTERNATIONAL, 2004, 44 (01) :162-170

[5]

Gorelik SS., 2005, RECRYSTALLIZATION ME

[6] A MATHEMATICAL-MODEL TO PREDICT THE MECHANICAL-PROPERTIES OF HOT ROLLED C-MN AND MICROALLOYED STEELS [J].

HODGSON, PD ;

GIBBS, RK .

ISIJ INTERNATIONAL, 1992, 32 (12) :1329-1338

[7] ON THE RECOVERY AND RECRYSTALLIZATION WHICH ATTEND STATIC SOFTENING IN HOT-DEFORMED COPPER AND ALUMINUM [J].

KWON, O ;

DEARDO, AJ .

ACTA METALLURGICA ET MATERIALIA, 1990, 38 (01) :41-54

[8] Modelling of microstructure evolution during hot rolling of a 780 MPa high strength steel [J].

Nakata, N ;

Militzer, M .

ISIJ INTERNATIONAL, 2005, 45 (01) :82-90

[9] Improved Model of Kinetics of Strain Induced Precipitation and Microstructure Evolution of Nb Microalloyed Steels during Multipass Rolling [J].

Pereda, B. ;

Rodriguez-Ibabe, J. M. ;

Lopez, B. .

ISIJ INTERNATIONAL, 2008, 48 (10) :1457-1466

[10]

Ringinen D. A., 2014, METALLURG, V57, p[67, 996]

← 1 2 →