Surface-micromachined dual Ka-band cavity backed patch antenna

被引:21
作者
Lukic, Milan V. [1 ]
Filipovic, Dejan S. [1 ]
机构
[1] Univ Colorado, Dept Elect & Comp Engn, Boulder, CO 80309 USA
关键词
patch antenna; rectangular coaxial lines; surface micro-machining;
D O I
10.1109/TAP.2007.900273
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
A dual Ka-band rectangular coaxial line fed cavity backed patch antenna fabricated by a sequential surface micromachining process with ten structural layers is presented in this letter. The antenna bandwidth is 4.1 % around 36,GHz, with gain and radiation efficiency of 5.7 dBi and 95 %, respectively. The lower band is characterized with 5.1 % bandwidth around 28 GHz and a monopole-like radiation pattern with 5.1 dBi maximum gain. Analysis and design are conducted with a finite element code and good agreement with measurements is demonstrated.
引用
收藏
页码:2107 / 2110
页数:4
相关论文
共 10 条
[1]  
CHEN R, 2004, WIRELESS DESIGN DEV, P16
[2]   Modeling, design, fabrication, and performance of rectangular μ-coaxial lines and components [J].
Filipovic, D. S. ;
Popovic, Z. ;
Vanhille, K. ;
Lukic, M. ;
Rondieau, S. ;
Buck, M. ;
Potvin, G. ;
Fontaine, D. ;
Nichols, C. ;
Sherrer, D. ;
Zhou, S. ;
Houck, W. ;
Fleming, D. ;
Daniel, E. ;
Wilkins, W. ;
Sokolov, V. ;
Evans, J. .
2006 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-5, 2006, :1393-+
[3]  
HA ML, 2004, IEEE MTT S, P1189
[4]  
*HFSS, 2005, HFSS V 10 0 US MAN
[5]   60-GHz CPW-fed post-supported patch antenna using micromachining technology [J].
Kim, JG ;
Lee, HS ;
Lee, HS ;
Yoon, JB ;
Hong, SC .
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2005, 15 (10) :635-637
[6]   A low-loss wideband suspended coaxial transmission line [J].
Llamas-Garro, I ;
Lancaster, MJ ;
Hall, PS .
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2004, 43 (02) :93-95
[7]  
PAN B, 2005, P IEEE APS URSI S WA, P397
[8]  
SHERRER D, 2004, Patent No. 20040263290
[9]   Wide-band E-shaped patch antennas for wireless communications [J].
Yang, F ;
Zhang, XX ;
Ye, XN ;
Rahmat-Samii, Y .
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2001, 49 (07) :1094-1100
[10]   3-D construction of monolithic passive components for RF and microwave ICs using thick-metal surface micromachining technology [J].
Yoon, JB ;
Kim, BI ;
Choi, YS ;
Yoon, E .
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2003, 51 (01) :279-288