Experimental analysis on thermal and friction factor characteristics of fluid flow in tube with novel double strip helical screw tape

被引:18
作者
Chaurasia, Shashank R. [1 ]
Sarviya, R. M. [1 ]
机构
[1] MANIT, Dept Mech Engn, Bhopal, India
关键词
Computational fluid dynamics; single and double strip helical screw tape inserts; heat transfer enhancement; friction factor; performance ratio; heat exchanger; HEAT-TRANSFER ENHANCEMENT; CIRCULAR TUBE; LAMINAR-FLOW; TURBULENT-FLOW; TURBULATORS; INSERT; WATER;
D O I
10.1177/0957650919885722
中图分类号
O414.1 [热力学];
学科分类号
摘要
An experimental analysis has been carried out to investigate the thermal and friction factor characteristics of fluid flow in a tube with double strip helical screw tape (DS-HST) inserts with different values of twist ratio and compared with single strip helical screw tape inserts and plain tube. Water is used as a working fluid at different flow rates with constant heat flux conditions. CFD analysis is also carried out to visualize thermal and fluid flow characteristics of fluid flow in tube with inserts. Experimental results have showed that Nusselt number and friction factor have attained excellent enhancement with double strip helical screw tape inserts in the range of flow rates than single strip helical screw tape inserts at the value of twist ratio 1.5. Correlation is also developed for Nusselt number with a range of Reynolds number, twist ratio and number of strips. Moreover, the performance ratio has attained maximum value at twist ratio of 2.5 with high values of flow rate. It is concluded that DS-HST is able to attain enhancement in the efficiency of heat exchanger, causing a reduction in size for thermal applications.
引用
收藏
页码:874 / 886
页数:13
相关论文
共 37 条
[1]  
Arun Prasad V., 2016, ASIAN J RES SOCIAL S, V6, P1703, DOI [10.5958/2249-7315.2016.01123.0, DOI 10.5958/2249-7315.2016.01123.0]
[2]  
Bergles A.E., 2012, P ASME 2012 SUMM HEA, P1, DOI DOI 10.1094/PDIS-11-11-0999-PDN
[3]  
Bergles A. E., 1985, HDB HEAT TRANSFER AP
[4]   SOME PERSPECTIVES ON ENHANCED HEAT-TRANSFER - 2ND-GENERATION HEAT-TRANSFER TECHNOLOGY [J].
BERGLES, AE .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1988, 110 (4B) :1082-1096
[5]  
Bergman TL., 2007, FUNDAMENTALS HEAT MA
[6]   Review of passive heat transfer augmentation techniques [J].
Dewan, A ;
Mahanta, P ;
Raju, KS ;
Kumar, PS .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2004, 218 (A7) :509-527
[7]   Enhancement of heat transfer in a tube with regularly-spaced helical tape swirl generators [J].
Eiamsa-Ard, S ;
Promvonge, P .
SOLAR ENERGY, 2005, 78 (04) :483-494
[8]  
Eiamsa-Ard S, 2014, ADV MECH ENG, V7, P1
[9]   Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger [J].
El Maakoul, Anas ;
Laknizi, Azzeddine ;
Saadeddine, Said ;
Ben Abdellah, Abdellatif ;
Meziane, Mohamed ;
El Metoui, Mustapha .
ENERGY CONVERSION AND MANAGEMENT, 2017, 133 :76-86
[10]   Performance analysis and flow visualization in a round tube heat exchanger inserted with wavy V-ribs [J].
Jedsadaratanachai, Withada ;
Boonloi, Amnart .
ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (09) :1-16