Rheocast of Al-Si-Mg Alloy Containing 1mass% Iron

被引：0

作者：

Tsubata, M. ^{[1
]}

Uetani, Y. ^{[2
]}

Takagi, H. ^{[3
]}

Matsuda, K. ^{[4
]}

Ikeno, S. ^{[4
]}

机构：

[1] Toyama Univ, 3190 Gofuku, Toyama 9308555, Japan

[2] Toyama Prefectural Univ, Toyama 9390398, Japan

[3] Toyama Alloy Co Ltd, Toyama 9348515, Japan

[4] Toyama Univ, Toyama 9308555, Japan

来源：

ADVANCED MATERIALS AND PROCESSING | 2007年 / 26-28卷

关键词：

Al-Si-Mg alloy; rheocast; semi-solid slurry; iron inetermetallic compounds; tensile properties;

D O I：

10.4028/www.scientific.net/AMR.26-28.543

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to rheocast using Al-Si foundry alloy with higher concentration of iron, semi-solid slurries were tried to manufacture by two different processes. The former process made the slurry with granular solid phase and iron containing intermetallic compound beta-phases of average length of 60 mu m. In the latter process, morphology of the beta-phases became thinner, although no difference in their lengths. These slurries were rheocast to a disk shape with diameter of 80mm and thickness of 5mm at slurry temperature of 873K. Ductility of the disk rheocast using the latter slurry was slightly improved in comparison with that of the former slurry. However these levels of ductility were still much lower than that of the slurry without beta-phases.

引用

页码：543 / +

页数：5

共 50 条

[41] Silicon spheroidization treatment of thixoformed Al-Si-Mg alloys
Ogris, E
Lüchinger, H
Uggowitzer, PJ
ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 149 - 154
[42] Synergistic influence of La and Zr on microstructure and mechanical performance of an Al-Si-Mg alloy at casting state
Cao, Yudong
Chen, Xiaohua
Wang, Zidong
Chen, Kaixuan
Pan, Shiwei
Zhu, Yuzhi
Wang, Yanlin
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 902
[43] Development of high performance near eutectic Al-Si-Mg alloy profile by micro alloying with Ti
Wu, Yuna
Zhang, Jianfeng
Liao, Hengcheng
Li, Gaiye
Wu, Yuping
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 660 : 141 - 147
[44] Effects of Cu and Zr Addition on the Tensile Properties, Corrosion Characteristics and Interfacial Compounds with Cast Iron of Al-Si-Mg Alloy for Compound Casting
Min, Kyoung-Min
Jung, Ki-Chae
Shin, Je-Sik
Kim, Jeong-Min
KOREAN JOURNAL OF MATERIALS RESEARCH, 2023, 33 (01): : 8 - 14
[45] Microstructural evolution and strengthening mechanism of an Al-Si-Mg alloy processed by high-pressure torsion with different heat treatments
Zhang, X.
Huang, L. K.
Zhang, B.
Chen, Y. Z.
Liu, F.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 794
[46] Microstructural evolution during unsteady-state horizontal solidification of Al-Si-Mg (356) alloy
Lima, J. O.
Barbosa, C. R.
Magno, I. A. B.
Nascimento, J. M.
Barros, A. S.
Oliveira, M. C.
Souza, F. A.
Rocha, O. L.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (06) : 1073 - 1083
[47] Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy
Prosenjit Das
Sudip K. Samanta
Himadri Chattopadhyay
Pradip Dutta
ActaMetallurgicaSinica(EnglishLetters), 2012, 25 (05) : 329 - 339
[48] Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy
Das, Prosenjit
Samanta, Sudip K.
Chattopadhyay, Himadri
Dutta, Pradip
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2012, 25 (05) : 329 - 339
[49] Enhancing mechanical properties of friction stir welded joints of Al-Si-Mg alloy through post weld heat treatments
Sharma, Vikas
Sharma, Chaitanya
Upadhyay, Vikas
Singh, Shailendra
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 628 - 636
[50] Dispersoid characteristics and elevated temperature creep resistance of Al-Si-Mg cast alloy with Zr addition
Huang, Huilan
Li, Wang
Hu, Chuanbo
Ding, Lipeng
Jia, Zhihong
Zhou, Nan
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 836

← 1 2 3 4 5 →