Oxidation Behavior of ca-based bulk amorphous materials

被引:13
作者
Barnard, Bryan R. [1 ]
Liaw, Peter K.
Buchanan, Raymond A.
Senkov, Oleg N.
Miracle, Daniel B.
机构
[1] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA
[2] Universal Energy Syst Inc, Dayton, OH 45432 USA
[3] USAF, Mat & Mfg Directorate, Wright Patterson AFB, OH 45433 USA
关键词
bulk-amorphous materials; metallic glasses; oxidation; kinetics; calcium-based alloys;
D O I
10.2320/matertrans.MJ200744
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, the room-temperature oxidation behaviors of three Ca-based bulk amorphous alloys, Ca65Mg15Zn20, Ca50Mg20Cu30, and Ca55Mg18Zn11Cu16, were examined under normal flowing laboratory air and compared with the oxidation behaviors of these alloys in the crystalline form tinder identical conditions. The degree of oxidation for alloys in the amorphous and crystalline conditions was investigated by periodically measuring the mass change over the oxidation time. From the results of the oxidation mass change, and oxide thickness measurements obtained from scanning-electron-microscopy (SEM) studies, it was determined that the Ca55Mg18Zn11Cu16 BMG possessed the most favorable oxidation resistance, followed closely by the Ca50Mg20Cu30 BMG. with the Ca65Mg15Zn20 BMG having the least favorable oxidation resistance. The trend in glass-forming abilities of the three compositions follows the same trend as the oxidation resistance in the three alloys. In all cases, the oxidation resistance of the amorphous alloys was superior to the oxidation resistance ofthe same alloys in the crystalline state.
引用
收藏
页码:1870 / 1878
页数:9
相关论文
共 55 条
[1]   Formation and thermal stability of Ca-Mg-Ag-Cu bulk glassy alloys [J].
Amiya, K ;
Inoue, A .
MATERIALS TRANSACTIONS, 2002, 43 (10) :2578-2581
[2]   Formation, thermal stability and mechanical properties of Ca-based bulk glassy alloys [J].
Amiya, K ;
Inoue, A .
MATERIALS TRANSACTIONS, 2002, 43 (01) :81-84
[3]   A MODEL FOR THE OXIDE-GROWTH STRESS AND ITS EFFECT ON THE CREEP OF METALS [J].
BERNSTEIN, HL .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (06) :975-986
[4]   Cu-Hf-Ti-Ag-Ta bulk metallic glass composites and their properties [J].
Bian, Z ;
Kato, H ;
Qin, CL ;
Zhang, W ;
Inoue, A .
ACTA MATERIALIA, 2005, 53 (07) :2037-2048
[5]  
Birks N., 1983, INTRO HIGH TEMPERATU
[6]   A 200 nm thick glass-forming metallic film for fatigue-property enhancements [J].
Chiang, CL ;
Chu, JP ;
Liu, FX ;
Liaw, PK ;
Buchanan, RA .
APPLIED PHYSICS LETTERS, 2006, 88 (13)
[7]   Shaping, joining and engraving of bulk metallic glasses using an electromechanical process [J].
de Oliveira, MF ;
Botta, WJ ;
Yavari, AR .
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, ISMANAM-2000, 2001, 360-3 :1-6
[8]   Air oxidation of Zr65Cu17.5Ni10Al7.5 its amorphous and supercooled liquid states, studied by thermogravimetric analysis [J].
Dhawan, A ;
Raetzke, K ;
Faupel, F ;
Sharma, SK .
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2003, 199 (03) :431-438
[9]   Study of oxidation behaviour of Zr-based bulk amorphous alloy Zr65CU17.5Ni10Al7.5 by thermogravimetric analyser [J].
Dhawan, A ;
Raetzke, K ;
Faupel, F ;
Sharma, SK .
BULLETIN OF MATERIALS SCIENCE, 2001, 24 (03) :281-283
[10]   COMPOSITIONAL DEPENDENCE OF GLASS FORMABILITY IN AL-NI-FE-GD AMORPHOUS-ALLOYS [J].
DOUGHERTY, GM ;
HE, Y ;
SHIFLET, GJ ;
POON, SJ .
SCRIPTA METALLURGICA ET MATERIALIA, 1994, 30 (01) :101-106