Infiltrated SmBa0.5Sr0.5Co2O5+δ cathodes for metal-supported solid oxide fuel cells

被引:27
作者
Zhou, Yucun [1 ]
Han, Da [1 ]
Yuan, Chun [1 ]
Liu, Minquan [1 ]
Chen, Ting [1 ]
Wang, Shaorong [1 ]
Zhan, Zhongliang [1 ]
机构
[1] Chinese Acad Sci SICCAS, Shanghai Inst Ceram, CAS Key Lab Mat Energy Convers, Shanghai 200050, Peoples R China
基金
中国国家自然科学基金;
关键词
Cathode; Infiltration; Metal-supported; Solid oxide fuel cell; PERFORMANCE; IMPEDANCE; PROGRESS; STACKS; MOBILE; SOFCS;
D O I
10.1016/j.electacta.2014.10.067
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
This paper reports the fabrication of the SmBa0.5Sr0.5Co2O5+delta (SBSCO) infiltrated scandia-stabilized-zirconia (SSZ) composite cathode for metal-supported solid oxide fuel cells (MS-SOFCs). The effects of the calcination temperature on the structure, morphology and polarization resistance of the composite cathode were studied. Cathode calcinated at 700 degrees C showed the finest microstructure and the lowest polarization resistance, e.g., 0.054 and 0.172 Omega cm(2) at 700 and 600 degrees C, respectively. Thermal shock resistance of the composite cathode was studied and no degradation was found after the 35 thermal cycles conducted between 100 and 600 degrees C with a rate of 10 degrees C min (1). MS-SOFC with the SBSCO infiltrated SSZ cathode was prepared and the maximum power density (MPD) can be as high as 1.25, 0.92, 0.61 and 0.39 W cm (2) when measured at 700, 650, 600 and 550 degrees C, respectively. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:231 / 236
页数:6
相关论文
共 50 条
[41]   A perovskite infiltrated cathode of metal-supported solid oxide electrolysis cell for CO2 electrolysis [J].
Zhang, Binze ;
Zhang, Zhen ;
Zhang, Lijie ;
Tang, Kaibin ;
Xia, Changrong .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 49 :417-423
[42]   Layered perovskite PrBa0.5Sr0.5CoCuO5+δ as a cathode for intermediate-temperature solid oxide fuel cells [J].
Wang, Biao ;
Long, Guohui ;
Ji, Yuan ;
Pang, Mingjun ;
Meng, Xiangwei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 606 :92-96
[43]   Characterization of SmBa0.5Sr0.5CoCuO5+δ cathode based on GDC and LSGM electrolyte for intermediate-temperature solid oxide fuel cells [J].
Wang, Biao ;
Long, Guohui ;
Li, Yunfei ;
Ji, Yuan .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2016, 41 (31) :13603-13610
[44]   Promoted Cr-poisoning tolerance of La2NiO4+δ-coated PrBa0.5Sr0.5Co1.5Fe0.5O5+δ cathode for intermediate temperature solid oxide fuel cells [J].
Li, Jin ;
Li, Jun ;
Yan, Dong ;
Pu, Jian ;
Chi, Bo ;
Jian, Li .
ELECTROCHIMICA ACTA, 2018, 270 :294-301
[45]   Electrochemical properties of pure Ba0.5Sr0.5Co0.8Fe0.2O3 and Ba0.5Sr0.5Co0.8Fe0.2O3-based composite cathodes for an intermediate temperature solid oxide fuel cell with Sc-doped zirconia solid electrolyte [J].
Park, Hee Jung ;
Kwak, Chan ;
Kim, Ju Sik ;
Ahn, Sung Jin .
JOURNAL OF POWER SOURCES, 2012, 213 :31-39
[46]   Metal-supported solid oxide fuel cells with barium-containing in-situ cathodes [J].
Baek, Seung-Wook ;
Jeong, Jihoon ;
Kim, Yu-Mi ;
Kim, Jung Hyun ;
Shin, Sungmin ;
Bae, Joongmyeon .
SOLID STATE IONICS, 2011, 192 (01) :387-393
[47]   Effect of Mn on the electrochemical properties of a layered perovskite NdBa0.5Sr0.5Co2-xMnxO5+δ (x=0, 0.25, and 0.5) for intermediate-temperature solid oxide fuel cells [J].
Kim, Jiyoun ;
Choi, Sihyuk ;
Park, Seonhye ;
Kim, Changmin ;
Shin, Jeeyoung ;
Kim, Guntae .
ELECTROCHIMICA ACTA, 2013, 112 :712-718
[48]   Fabrication and characterization of Sm0.2Ce0.8O2-δ-Sm0.5Sr0.5CoO3-δ composite cathode for anode supported solid oxide fuel cell [J].
Chang, Jen-Chen ;
Lee, Maw-Chwain ;
Yang, Rung-Je ;
Chang, Yang-Chuang ;
Lin, Tai-Nan ;
Wang, Chun-Hsiu ;
Kao, Wei-Xin ;
Lee, Lin-Song .
JOURNAL OF POWER SOURCES, 2011, 196 (06) :3129-3133
[49]   Investigation of Ce0.9Sr0.1Cr0.5Co0.5O3-δ as the anode material for solid oxide fuel cells fueled with H2S [J].
Zhu, Xiufang ;
Shi, Yingying ;
Li, Aiping ;
Zhong, Qin .
IONICS, 2014, 20 (07) :1011-1021
[50]   F and Cl anions co-doped La0.5Sr0.5FeO3-δ cathodes for proton-conducting solid oxide fuel cells [J].
Tang, Ruoqi ;
Men, Xin .
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2025, 322