Low temperature depolymerization and polycondensation of a slag-based inorganic polymer

被引:43
作者
Wang, Kaituo
Lemougna, Patrick N.
Tang, Qing
Li, Wei
He, Yan
Cui, Xuemin [1 ]
机构
[1] Guangxi Univ, Sch Chem & Chem Engn, Nanning 530004, Peoples R China
关键词
Powders: solid state reaction; Impedance; Strength; Silicate; Thermal applications; ALKALI-ACTIVATED MATERIALS; BLAST-FURNACE SLAG; MECHANICAL-PROPERTIES; AL-27; NMR; FLY-ASH; COMPRESSIVE STRENGTH; TRANSPORT-PROPERTIES; THERMAL-PROPERTIES; AQUEOUS-SOLUTION; STEEL SLAG;
D O I
10.1016/j.ceramint.2017.04.052
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this paper, the depolymerization and polycondensation process, compressive strength, gel content and conductance of an alkali-activated slag (AAS) (an inorganic polymer or high-calcium geopolymer) paste cured at low temperature (-25 degrees C similar to 25 degrees C) were studied. The results showed that gel content of the AAS inorganic polymer sample first increased and then decreased with the decreasing of the curing temperature for 24 h, reaching a maximum value of 37.8 wt% in the samples cured at 0 degrees C. Chemical structural data are obtained by nuclear magnetic resonance (NMR) spectroscopy for 6-coordinated (octahedral) aluminum can be observed at low temperature (< 0 degrees C) and the gel contains primarily Q(1),(1Al), Q(2)(Al-1) and Q(3) at 0 degrees C. The inductively coupled plasma emission spectrometry (ICP) analysis of the products showed depolymerization of a great amount of slag at low temperature. The impedance analysis indicated that low temperature (< 0 degrees C) will inhibit the polycondensation process but almost not affect the depolymerization process so as to make a distinction between the depolymerization and polycondensation process in the AAS inorganic polymer system.
引用
收藏
页码:9067 / 9076
页数:10
相关论文
共 51 条
[21]   Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash [J].
Lemougna, Patrick N. ;
MacKenzie, Kenneth J. D. ;
Melo, U. F. Chinje .
CERAMICS INTERNATIONAL, 2011, 37 (08) :3011-3018
[22]   Study of the preparation of CdS on the surface of geopolymer spheres and photocatalyst performance [J].
Li, Chun-min ;
He, Yan ;
Tang, Qing ;
Wang, Kai-tuo ;
Cui, Xue-min .
MATERIALS CHEMISTRY AND PHYSICS, 2016, 178 :204-210
[23]   The enhancement effect of pre-reduction using zero-valent iron on the solidification of chromite ore processing residue by blast furnace slag and calcium hydroxide [J].
Li, Jinchunzi ;
Chen, Zhonglin ;
Shen, Jimin ;
Wang, Binyuan ;
Fan, Leitao .
CHEMOSPHERE, 2015, 134 :159-165
[24]   HIGH-RESOLUTION AL-27 NMR OF ALUMINOSILICATES [J].
LIPPMAA, E ;
SAMOSON, A ;
MAGI, M .
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1986, 108 (08) :1730-1735
[25]   A comparative study on fly ash, geopolymer and faujasite block for Pb removal from aqueous solution [J].
Liu, Yi ;
Yan, Chunjie ;
Zhang, Zuhua ;
Wang, Hongquan ;
Zhou, Sen ;
Zhou, Wei .
FUEL, 2016, 185 :181-189
[26]   Effect of curing temperature on geopolymerization of metakaolin-based geopolymers [J].
Mo Bing-hui ;
He Zhu ;
Cui Xue-min ;
He Yan ;
Gong Si-yu .
APPLIED CLAY SCIENCE, 2014, 99 :144-148
[27]  
Ohsawa, 1968, P 5 ISCC
[28]   The setting time of a clay-slag geopolymer matrix: the influence of blast-furnace-slag addition and the mixing method [J].
Perna, Ivana ;
Hanzlicek, Tomas .
JOURNAL OF CLEANER PRODUCTION, 2016, 112 :1150-1155
[29]   Advances in understanding alkali-activated materials [J].
Provis, John L. ;
Palomo, Angel ;
Shi, Caijun .
CEMENT AND CONCRETE RESEARCH, 2015, 78 :110-125
[30]   Geopolymers and Related Alkali-Activated Materials [J].
Provis, John L. ;
Bernal, Susan A. .
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44, 2014, 44 :299-327