Importance of oxidoreduction phenomena in glass

Oxydo-reduction phenomenon concerns glass manufacturing as well as its properties. Various oxidation scales have been used by glassmakers, the most widely used being the ratio between Fe2+ and the total iron content. Comparisons are made with others, such as the partial pressure of oxygen or the redox potential. The influence of the chemical composition of the glass is also studied as well as that of the temperature, through the results obtained in Saint-Gobain Recherche and in other laboratories. In industrial glass manufacturing, the oxidation equilibrium is usually achieved during the fining process, an intense 'bubbling' being necessary to obtain a homogeneous glass. Thus, the oxidoreduction state of the glass does not depend on the atmosphere under which it was made, but depends on the mixture of gases generated during the fining process, which is described through the reactions generated by the two main fining systems, arsenic oxide or antimony oxide + sodium nitrate and sodium sulphate + a reducing agent. The former provides oxygen and the latter, a mixture of oxygen and sulphur dioxide. Consequently, a glass melted with arsenic oxide is more oxidised than a glass melted with sodium sulphate. The equilibrium constant used to interpret the latter system, mostly used for soda lime silica glasses fining, is given as a function of the temperature and some of the consequences are examined. Obviously, the coloration by iron oxide impurities is influenced by the manufacturing process. Some other colouring oxides are submitted to a change of oxidation state and thus to a modification of their colouring action. A quick review is done of the transition metal coloration, of the electron-charge-transfer absorption due to sulphides or selenides, and of aggregate formation inducing the well-known red ruby glass, for instance. (C) 2002 Academie des sciences / Editions scientifiques et medicales Elsevier SAS.