Design, implementation, and performance evaluation of a 4-DOF parallel robot

被引：28

作者：

Choi, Hee-Byoung ^{[1
]}

Konno, Atsushi ^{[2
]}

Uchiyama, Masaru ^{[2
]}

机构：

[1] Chungnam Natl Univ, Taejon 305764, South Korea

[2] Tohoku Univ, Dept Aerosp Engn, Sendai, Miyagi 9808579, Japan

来源：

ROBOTICA | 2010年 / 28卷

关键词：

Design; parallel robot; 4-DOF; MECHANISM;

D O I：

10.1017/S0263574709005621

中图分类号：

TP24 [机器人技术];

学科分类号：

080202 ; 1405 ;

摘要：

This paper deals with the design, implementation, and performance evaluation of a new type of 4-DOF parallel mechanism providing three translations and one rotation for high-speed handling and machining. This parallel mechanism is named H4. A necessary condition and system configuration of the H4 are also described. Hardware and kinematics of the H4 is addressed and the manipulability ellipsoid which is one of the widely used methods to examine the design of parallel mechanisms is addressed. The performance evaluation is carried out to demonstrate the H4 robot. The Simulation and experimental results show that three different controllers, the PD, PD + velocity feed-forward, and dynamic compensation controller, dramatically improve the trajectory tracking accuracy.

引用

页码：107 / 118

页数：12

共 20 条

[11] Design and analysis of a redundantly actuated parallel mechanism for rapid machining
Kim, J
Park, FC
Ryu, SJ
Kim, J
Hwang, JC
Park, C
Iurascu, CC
[J]. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 2001, 17 (04): : 423 - 434
[12] Merlet J.P., 2000, PARALLEL ROBOTS
[13] Pierrot F, 2001, IEEE INT CONF ROBOT, P3256, DOI 10.1109/ROBOT.2001.933120
[14] Pierrot F., 1999, P IEEE ASME INT C AD, P508
[15] Stewart D., 1965, P I MECH ENG, V180, P371, DOI DOI 10.1243/PIME_PROC_1965_180_029_02
[16] Tsai L.-W., 1999, ROBOT ANAL
[17] UCHIYAMA M, 1994, P 1 WORLD AUT C WAC, V2, P281
[18] YOSHIKAWA T, 1985, J ROBOTIC SYST, V2, P113
[19] MANIPULABILITY OF ROBOTIC MECHANISMS
YOSHIKAWA, T
[J]. INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 1985, 4 (02) : 3 - 9
[20] [No title captured]

← 1 2 →