Effects of Mandrel Angle on Hydrostatic Extrusion Process of Magnesium Alloy Tube

被引:2
作者
Zhao Mengjun [1 ]
Wu Zhilin [1 ]
Cai Hongming [1 ]
机构
[1] Nanjing Univ Sci & Technol, Nanjing 210094, Jiangsu, Peoples R China
关键词
hydrostatic extrusion; AZ80; mandrel angle; MECHANICAL-PROPERTIES;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The hydrostatic extrusion process of magnesium alloy AZ80 tube with different mandrel angles (90 degrees, 120 degrees, 150 degrees) was simulated by the DEFORM-3D software with different extrusion speeds and initial billet temperatures. The simulated results show that the peak load of the extrusion process with big mandrel angle is obviously higher than that of the small angle and the inhomogeneity of billet velocity field is intensified with the increase of the mandrel angle.
引用
收藏
页码:1214 / 1218
页数:5
相关论文
共 13 条
[1]   Microstructure and texture development during hydrostatic extrusion of magnesium alloy AZ31 [J].
Bohlen, J ;
Yi, SB ;
Swiostek, J ;
Letzig, D ;
Brokmeier, HG ;
Kainer, KU .
SCRIPTA MATERIALIA, 2005, 53 (02) :259-264
[2]  
Chen Zhenghua, 2008, WROUGHT MAGNESIUM AL
[3]  
Fuchi Wang, 2008, HYDROSTATIC EXTRUSIO
[4]   Hot extrusion of hollow helical tubes of magnesium alloys [J].
Hwang, Yeong-Maw ;
Chang, Cheng-Nan .
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 :2249-2254
[5]  
Jianzhong Cui, 2011, MACE 2011 P, P4317
[6]  
Jun Hu, 2014, HOT WORKING TECHNOLO, V43, P20
[7]  
Rong Wang, 2008, J CENT S U SCI TECHN, V39, P251
[8]  
Shaochun Wang, 2008, LIGHT ALLOY FABRICAT, V36, P34
[9]   Hydrostatic extrusion of commercial magnesium alloys at 100°C and its influence on grain refinement and mechanical properties [J].
Swiostek, J. ;
Goeken, J. ;
Letzig, D. ;
Kainer, K. U. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 424 (1-2) :223-229
[10]   Improving the mechanical properties of pure magnesium through cold hydrostatic extrusion and low-temperature annealing [J].
Volkov, A. Yu. ;
Kliukin, I. V. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 627 :56-60