Electromigration-induced Bi-rich whisker growth in Cu/Sn-58Bi/Cu solder joints

Effect of current stressing on whisker growth in Cu/Sn-58Bi/Cu solder joints was investigated with current densities of 5 x 10(3) and 10(4) A/cm(2) in oven at different temperatures. Two types of whiskers, columnar-type and filament-type, were observed on the solder film propagating along the surface of the Cu substrate and at the cathode interface, respectively, accompanied with many hillocks formation. Typically, these whiskers were 5-15 mu m in length and 0.06-2 mu m in diameter. EDX revealed that these whiskers and hillocks were mixtures of Sn and Bi rather than single crystal. It should be noted that the sprouted whiskers would not grow any more even if the current-stressing time increased again when the solder joint was stressed under lower current density. Nevertheless, when the current density was up to 10(4) A/cm(2), the whiskers would melt along with the increasing current-stressing time. Results indicated that the compressive stress generated by precipitation of Cu6Sn5 intermetallics provides a driving force for whisker growth on the solder film, and the Joule heating accumulation should be responsible for whisker growth at the cathode interface.