Fatigue crack growth behaviour of a nickel base super alloy GTM720 under cold-TURBISTAN spectrum load sequence

Damage tolerance concept is widely used in aerospace industry for designing structural components against fatigue. In this study, an attempt is made to predict fatigue crack growth behavior in an aero-engine material under a standard spectrum load sequence using a closure independent crack driving force parameter, K* and compare with experimental results. Initially, constant amplitude (CA) fatigue crack growth rate (FCGR) behavior of GTM720, a nickel based super alloy was determined at stress ratios, R = sigma(min)/sigma(max) ranging from R = 0.1 to 0.7. Then, empirical fatigue crack growth law was derived from this CA-FCGR data in terms of two parameter crack driving force, K*. Further, the fatigue crack growth behavior was predicted through cycle-by cycle approach in a pre-cracked compact tension (CT) specimen of GTM720 alloy under standard cold-TURBISTAN spectrum load sequence using K* as the crack driving force. Also, experimental fatigue crack growth behavior under the same load sequence was determined in a CT specimen and compared with predicted results. A fairly good correlation was observed with predicted and experimental results. Predicted fatigue crack growth life was conservative and the fatigue crack growth life ratio, N-pred/N-expt was about 0.92.