Control of post-weld fracture toughness in friction stir processed X80 HSLA steel

被引：6
作者：
Crook, Nolan T. [1 ]
Nelson, Tracy W. [2 ]
机构：
[1] Brigham Young Univ, Dept Mech Engn, 350 EB, Provo, UT 84602 USA
[2] Brigham Young Univ, Dept Mfg Engn, 265 CTB, Provo, UT 84602 USA
来源：
ENGINEERING FRACTURE MECHANICS | 2022年 / 271卷
基金：
美国国家科学基金会;
关键词：
FSW; CTOD; X80; MICROSTRUCTURE; ZONE;
D O I：
10.1016/j.engfracmech.2022.108586
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The present study investigates the fracture toughness of FSW X80 HSLA steel welds. Weld cooling rate and peak temperature were varied among welds; indirectly manipulated through FSW travel speed, rpm, and weld preheat. Fracture toughness was tested according to ASTM 1820 standard along the weld centerline using surface-notched SEB specimen cooled to -40 degrees C. Results demonstrate that CTOD of FSW X80 has a strong inverse linear correlation with post-weld cooling rate. Low cooling rate welds exhibited CTOD values consistently above those of base metal. Microstructure similar to the base metal can be recreated throughout the weld. Weld CTOD can be selected by controlling weld CR.
引用
收藏
页数：16
相关论文
共 50 条
  • [31] Effect of H2S Corrosion on the Fracture Toughness of the X80 Pipeline Steel Welded Joint
    Wang, Xueli
    Wang, Dongpo
    Deng, Caiyan
    Li, Chengning
    MATERIALS, 2022, 15 (13)
  • [32] Thickness Effect of 2195 Al-Li Alloy Friction Stir Weld Fracture Toughness
    Song, Kejin
    Liang, Peichen
    Fu, Xuesong
    Hu, Zhenggen
    Chen, Guoqing
    Zhou, Wenlong
    MATERIALS, 2024, 17 (15)
  • [33] Influence of Tool Rotational Speed and Post-Weld Heat Treatments on Friction Stir Welded Reduced Activation Ferritic-Martensitic Steel
    Manugula, Vijaya L.
    Rajulapati, Koteswararao V.
    Reddy, G. Madhusudhan
    Mythili, R.
    Rao, K. Bhanu Sankara
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (08): : 3702 - 3720
  • [34] Grain growth phenomena in friction stir welded 1100 Al during post-weld heat treatment
    Sato, Y. S.
    Watanabe, H.
    Kokawa, H.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (04) : 318 - 323
  • [35] Microstructure and Mechanical Properties of X80 Pipeline Steel Joints by Friction Stir Welding Under Various Cooling Conditions
    G.M.Xie
    R.H.Duan
    P.Xue
    Z.Y.Ma
    H.L.Liu
    Z.A.Luo
    Acta Metallurgica Sinica(English Letters), 2020, 33 (01) : 88 - 102
  • [36] Influences of Friction Stir Welding and Post-Weld Heat Treatment on Al-Cu-Li Alloy
    Lin, Yi
    Lu, Change
    Wei, Chengyang
    Zheng, Ziqiao
    ADVANCED ENGINEERING MATERIALS, 2018, 20 (02)
  • [37] Microstructure and Mechanical Properties of X80 Pipeline Steel Joints by Friction Stir Welding Under Various Cooling Conditions
    G. M. Xie
    R. H. Duan
    P. Xue
    Z. Y. Ma
    H. L. Liu
    Z. A. Luo
    Acta Metallurgica Sinica (English Letters), 2020, 33 : 88 - 102
  • [38] Hydrogen Permeation and Electrochemical Corrosion Behavior of the X80 Pipeline Steel Weld
    H. B. Xue
    Y. F. Cheng
    Journal of Materials Engineering and Performance, 2013, 22 : 170 - 175
  • [39] Hydrogen Permeation and Electrochemical Corrosion Behavior of the X80 Pipeline Steel Weld
    Xue, H. B.
    Cheng, Y. F.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (01) : 170 - 175
  • [40] The Toughness Index of X80 Mother Linepipe Steel and Its Optimum Microstructure
    Zhang Xiaoli
    Feng Yaorong
    Liu Yinglai
    Zhuang Chuanjing
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 1, 2009, : 669 - 673
12345