Control of post-weld fracture toughness in friction stir processed X80 HSLA steel

被引：6
作者：
Crook, Nolan T. [1 ]
Nelson, Tracy W. [2 ]
机构：
[1] Brigham Young Univ, Dept Mech Engn, 350 EB, Provo, UT 84602 USA
[2] Brigham Young Univ, Dept Mfg Engn, 265 CTB, Provo, UT 84602 USA
来源：
ENGINEERING FRACTURE MECHANICS | 2022年 / 271卷
基金：
美国国家科学基金会;
关键词：
FSW; CTOD; X80; MICROSTRUCTURE; ZONE;
D O I：
10.1016/j.engfracmech.2022.108586
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The present study investigates the fracture toughness of FSW X80 HSLA steel welds. Weld cooling rate and peak temperature were varied among welds; indirectly manipulated through FSW travel speed, rpm, and weld preheat. Fracture toughness was tested according to ASTM 1820 standard along the weld centerline using surface-notched SEB specimen cooled to -40 degrees C. Results demonstrate that CTOD of FSW X80 has a strong inverse linear correlation with post-weld cooling rate. Low cooling rate welds exhibited CTOD values consistently above those of base metal. Microstructure similar to the base metal can be recreated throughout the weld. Weld CTOD can be selected by controlling weld CR.
引用
收藏
页数：16
相关论文
共 50 条
  • [21] Effect of post-weld heat treatment on microstructure and fracture toughness of 30CrMnSiNi2A steel welded joints
    Huo, LX
    Chen, FR
    Zhang, YF
    Zhang, L
    Liu, FJ
    Chen, G
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2003, 19 (05) : 483 - 486
  • [22] High temperature processed high Nb X80 steel with excellent heat-affected zone toughness
    Zhu, Zhixiong
    Han, Jian
    Li, Huijun
    Lu, Cheng
    MATERIALS LETTERS, 2016, 163 : 171 - 174
  • [23] Effect of Post-weld Heat Treatment on Microstructure and Fracture Toughness of 30CrMnSiNi2A Steel Welded Joints
    Lixing HUO
    Journal of Materials Science & Technology, 2003, (05) : 483 - 486
  • [24] Effects of hydrogen on the fracture toughness of X80 steel base metal and girth weld under strong cathodic current with in-situ hydrogen charging
    Xing, Yunying
    Yang, Zhile
    Yao, Xingcheng
    Wang, Xiuyun
    Lu, Minxu
    Zhang, Lei
    Qiao, Lijie
    ENGINEERING FAILURE ANALYSIS, 2022, 135
  • [25] Microstructure and mechanical properties of friction stir welded X80 pipeline steel joint under additional cooling
    Xue, P.
    Zhao, H.
    Komizo, Y.
    Ma, Z. Y.
    PROCEEDINGS OF THE 1ST INTERNATIONAL JOINT SYMPOSIUM ON JOINING AND WELDING, 2013, : 445 - +
  • [26] Effect of post-weld heat treatment on friction welded joint of carbon steel to stainless steel
    Ma, Hong
    Qin, Guoliang
    Geng, Peihao
    Li, Fei
    Meng, Xiangmeng
    Fu, Banglong
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 227 : 24 - 33
  • [27] Improvement of toughness and strength of thick structural steel weld by friction stir welding conditions
    Morisada, Y.
    Fujii, H.
    Nishimoto, R.
    Miyazawa, T.
    Iwamoto, Y.
    Ueji, R.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (04) : 287 - 292
  • [28] Effect of grain boundary ferrite morphologies on impact toughness of X80 girth weld
    Wang, Ce
    Di, Xinjie
    Dai, Lianshuang
    Duan, Qiyue
    Han, Jiawei
    Yang, Xiaocong
    Cui, Shaohua
    Li, Chengning
    MATERIALS LETTERS, 2024, 377
  • [29] Effect of post-weld heat treatment on the mechanical behavior and dislocation density of friction stir welded Al6061
    Baghdadi, Amir Hossein
    Rajabi, Armin
    Selamat, Nor Fazilah Mohamad
    Sajuri, Zainuddin
    Omar, Mohd Zaidi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 754 : 728 - 734
  • [30] Effect of H2S Corrosion on the Fracture Toughness of the X80 Pipeline Steel Welded Joint
    Wang, Xueli
    Wang, Dongpo
    Deng, Caiyan
    Li, Chengning
    MATERIALS, 2022, 15 (13)
12345