Optimization of processing-microstructure-properties relationship in friction-stir welded 6061-T6 aluminum alloy

被引：108

作者：

Malopheyev, Sergey ^{[1
]}

Vysotskiy, Igor ^{[1
]}

Kulitskiy, Vladislav ^{[1
]}

Mironov, Sergey ^{[2
]}

Kaibyshev, Rustam ^{[1
]}

机构：

[1] Belgorod State Univ, Lab Mech Properties Nanostruct Mat & Superalloys, Pobeda 85, Belgorod 308015, Russia

[2] Tohoku Univ, Grad Sch Engn, Dept Mat Proc, Sendai, Miyagi 9808579, Japan

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 662卷

关键词：

Al-Mg-Si alloys; Friction-stir welding; Precipitation strengthening; Postweld heat treatment; MG-SI-CU; MECHANICAL-PROPERTIES; PRECIPITATION; SEQUENCE; STRENGTH; JOINTS;

D O I：

10.1016/j.msea.2016.03.063

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this work, a simple but effective approach for improvement of strength of friction-stir welded 6061-T6 aluminum alloys was elaborated. It involves friction-stir welding (FSW) at relatively high tool rotational speed and welding speed followed by standard post-weld aging. The selected combination of FSW parameters provides high welding temperature as well as rapid cooling rate. This leads to complete dissolution of strengthening precipitates in stir zone but hinders their coarsening in heat-affected zone. In turn, this enables to avoid the formation of softened region during subsequent aging and thus substantially enhances strength and improves ductility. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：136 / 143

页数：8

共 50 条

[1] Microstructure-strength relationship in friction-stir welded 6061-T6 aluminum alloy
Kalinenko, Alexander
Kim, Konstantin
Vysotskiy, Igor
Zuiko, Ivan
Malopheyev, Sergey
Mironov, Sergey
Kaibyshev, Rustam
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793 (793):
[2] Microstructure in friction-stir welded dissimiliar magnesium alloys to 6061-T6 aluminum alloy
Somasekharan, AC
Murr, LE
MATERIALS CHARACTERIZATION, 2004, 52 (01) : 49 - 64
[3] Optimization of Friction-Stir Welding of 6061-T6 Aluminum Alloy
Vysotskiy, I. V.
Malopheyev, S. S.
Mironov, S. Yu.
Kaibyshev, R. O.
PHYSICAL MESOMECHANICS, 2020, 23 (05) : 402 - 429
[4] Optimization of Friction-Stir Welding of 6061-T6 Aluminum Alloy
I. V. Vysotskiy
S. S. Malopheyev
S. Yu. Mironov
R. O. Kaibyshev
Physical Mesomechanics, 2020, 23 : 402 - 429
[5] Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloy
Liu, HJ
Fujii, H
Maeda, M
Nogi, K
JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (15) : 1061 - 1063
[6] Microstructural aspects of the friction-stir welding of 6061-T6 aluminum
Liu, G
Murr, LE
Niou, CS
McClure, JC
Vega, FR
SCRIPTA MATERIALIA, 1997, 37 (03) : 355 - 361
[7] Relationship between welding conditions, abnormal grain growth and mechanical performance in friction-stir welded 6061-T6 aluminum alloy
Kalinenko, Alexander
Vysotskii, Igor
Malopheyev, Sergey
Mironov, Sergey
Kaibyshev, Rustam
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 817
[8] Friction Stir Welding of 6061-T6 Aluminum Alloy
Almanar, Indra Putra
Hanapi, Mohd Haslam
Abu Seman, Anasyida
Hussain, Zuhailawati
SOLID STATE SCIENCE AND TECHNOLOGY XXVI, 2012, 501 : 145 - +
[9] Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy
Zhou, L.
Luo, L. Y.
Zhang, T. P.
He, W. X.
Huang, Y. X.
Feng, J. C.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 3425 - 3433
[10] Effect of rotation speed on microstructure and mechanical properties of refill friction stir spot welded 6061-T6 aluminum alloy
L. Zhou
L. Y. Luo
T. P. Zhang
W. X. He
Y. X. Huang
J. C. Feng
The International Journal of Advanced Manufacturing Technology, 2017, 92 : 3425 - 3433

← 1 2 3 4 5 →