Fabrication of high fill-factor aspheric microlens array by digital maskless lithography

被引：9
|
作者：
Zhong, Kejun [1 ]
Zhang, Hailin [1 ]
Gao, Yiqing [1 ]
机构：
[1] Nanchang Hangkong Univ, Jiangxi Engn Lab Optoelect Testing Technol, Nanchang 330063, Jiangxi, Peoples R China
来源：
OPTIK | 2017年 / 142卷
关键词：
Fill-factor; Aspheric microlens array; Digital maskless lithography;
D O I：
10.1016/j.ijleo.2017.05.069
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
A simple and effective method for fabricating high fill-factor aspheric microlens array using digital maskless lithography is reported. The method use the contour planes of the designed profile as binary image, which replace physical mask by DMD display. On the lithography system, the dose accumulated over multiple exposures and the exposure dose reconstructed in wafer, then the designed profile developed. Aspheric microlens arrays with hexagonal base and square base were produced by the method, and they were gapless at each microlens periphery, so the microlens array with fill-factor of 100%. (C) 2017 Elsevier GmbH. All rights reserved.
引用
收藏
页码：243 / 248
页数：6
相关论文
共 50 条
  • [1] Fabrication of high fill-factor aspheric microlens array by dose-modulated lithography and low temperature thermal reflow
    Junjie Zhu
    Mujun Li
    Jinfeng Qiu
    Huichun Ye
    Microsystem Technologies, 2019, 25 : 1235 - 1241
  • [2] Fabrication of high fill-factor aspheric microlens array by dose-modulated lithography and low temperature thermal reflow
    Zhu, Junjie
    Li, Mujun
    Qiu, Jinfeng
    Ye, Huichun
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2019, 25 (04): : 1235 - 1241
  • [3] Fabrication of a 100%fill-factor silicon microlens array
    闫建华
    欧文
    欧毅
    半导体学报, 2012, 33 (03) : 48 - 51
  • [4] Fabrication of a 100% fill-factor silicon microlens array
    Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China
    J. Semicond., 1674, 3
  • [5] Fabrication of a 100% fill-factor silicon microlens array
    Yan Jianhua
    Ou Wen
    Ou Yi
    JOURNAL OF SEMICONDUCTORS, 2012, 33 (03)
  • [6] A fabrication technique for microlens array with high fill-factor and small radius of curvature
    Hsieh, Hsin-Ta
    Su, Guo-Dung John
    ADVANCED FABRICATION TECHNOLOGIES FOR MICRO/NANO OPTICS AND PHOTONICS, 2008, 6883
  • [7] Fabrication of high fill-factor microlens array using spatially constrained thermal reflow
    Qiu, Jinfeng
    Li, Mujun
    Ye, Huichun
    Zhu, Junjie
    Ji, Chao
    SENSORS AND ACTUATORS A-PHYSICAL, 2018, 279 : 17 - 26
  • [8] High fill-factor microlens array mold insert fabrication using a thermal reflow process
    Yang, HH
    Chao, CK
    Wei, MK
    Lin, CP
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2004, 14 (08) : 1197 - 1204
  • [9] New high fill-factor triangular microlens array fabrication method using UV proximity printing
    Lin, Tsung-Hung
    Yang, Hsiharng
    Chao, Ching-Kong
    Hung, Shih-Yu
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2009, 15 (08): : 1255 - 1261
  • [10] New high fill-factor triangular microlens array fabrication method using UV proximity printing
    Tsung-Hung Lin
    Hsiharng Yang
    Ching-Kong Chao
    Shih-Yu Hung
    Microsystem Technologies, 2009, 15
12345