Development of a helium-cooled divertor: Material choice and technological studies

被引：153

作者：

Norajitra, P.

Boccaccini, L. V.

Gervash, A.

Giniyatulin, R.

Holstein, N.

Ihli, T.

Janeschitz, G.

Krauss, W.

Kruessmann, R.

Kuznetsov, V.

Makhankov, A.

Mazul, I.

Moeslang, A.

Ovchinnikov, I.

Rieth, M.

Zeep, B.

机构：

[1] Forschungszentrum Karlsruhe, D-76021 Karlsruhe, Germany

[2] Sci Tech Ctr Sintez, DV Efremov Inst, St Petersburg 196641, Russia

来源：

JOURNAL OF NUCLEAR MATERIALS | 2007年 / 367卷 / SPEC. ISS.期

基金：

欧盟地平线“2020”;

关键词：

12;

D O I：

10.1016/j.jnucmat.2007.04.027

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Within the framework of the EU power plant conceptual study (PPCS), a He-cooled divertor concept has been investigated at Forschungszentrum Karlsruhe in cooperation with the Efremov Institute. The design goal is to remove a high heat load of at least 10 MW/m(2). The design is based on a modular construction of cooling finger unit that helps reduce thermal stresses. The divertor finger unit, which is cooled by high pressure helium, consists of a tungsten tile as thermal shield and sacrificial layer, and a thimble made of tungsten alloy. The success of this design depends strongly on the effectiveness of the cooling technology and on the availability of appropriate structural materials such as tungsten alloy and oxide-dispersion-strengthened (ODS) steel as well as the related fabrication and joining technology. Results of this investigation are discussed in the paper. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：1416 / 1421

页数：6

共 10 条

[1]

GINIYATULIN R, 2004, 23 SOFT VEN IT 20 24

[2]

IHLI T, 2004, 23 S FUS TECHN VEN I

[3]

*ITER, 2001, G74MA10010711W02 ITE, P4

[4]

KRAUSS W, 2005, P ISFNT 7 TOK JAP 22

[5] Material surface damage under high pulse loads typical for ELM bursts and disruptions in ITER [J].

Landman, I. S. ;

Pestchanyi, S. E. ;

Safronov, V. M. ;

Bazylev, B. N. ;

Garkusha, I. E. .

PHYSICA SCRIPTA, 2004, T111 :206-212

[6] Simulation of tokamak armour erosion and plasma contamination at intense transient heat fluxes in ITER [J].

Landman, IS ;

Bazylev, BN ;

Garkusha, IE ;

Loarte, A ;

Pestchanyi, SE ;

Saftonov, VM .

JOURNAL OF NUCLEAR MATERIALS, 2005, 337 (1-3) :761-765

[7] Development of a helium-cooled divertor concept: design-related requirements on materials and fabrication technology [J].

Norajitra, P ;

Boccaccini, LV ;

Diegele, E ;

Filatov, V ;

Gervash, A ;

Giniyatulin, R ;

Gordeev, S ;

Heinzel, V ;

Janeschitz, G ;

Konys, J ;

Krauss, W ;

Kruessmann, R ;

Malang, S ;

Mazul, I ;

Moeslang, A ;

Petersen, C ;

Reimann, G ;

Rieth, M ;

Rizzi, G ;

Rumyantsev, M ;

Ruprecht, R ;

Slobodtchouk, V .

JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :1594-1598

[8]

NORAJITRA P, 2005, P ISFNT 7 TOK JAP 22

[9]

NORAJITRA P, 2003, 20 S FUS ENG SOFE SA

[10]

ZEEP B, 2005, P 16 INT PLANS SEM R

← 1 →