Microstructure and mechanical properties of pure Ti processed by high-ratio differential speed rolling at room temperature

被引：110

作者：

Kim, W. J. ^{[1
]}

Yoo, S. J. ^{[1
]}

Lee, J. B. ^{[2
]}

机构：

[1] Hongik Univ, Dept Mat Sci & Engn, Seoul 121791, South Korea

[2] Tohoku Univ, Dept Mat Sci & Engn, Aoba Ku, Sendai, Miyagi 9808579, Japan

来源：

SCRIPTA MATERIALIA | 2010年 / 62卷 / 07期

关键词：

Cold working; Severe plastic deformation (SPD); Titanium; Grain refining; Texture; SEVERE PLASTIC-DEFORMATION; TITANIUM; SHEETS;

D O I：

10.1016/j.scriptamat.2009.12.008

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

High-strength Ti sheets could be fabricated by effective grain-refinement through high-ratio differential speed rolling for a thickness reduction of 63% in a single rolling pass at room temperature. Formation of narrowly spaced shear bands distributed uniformly over the entire thickness section of the sheet and a high temperature rise by intensive shear banding during rolling resulted in the formation of ultrafine grains with the size of 0.1-0.3 mu m. The rolled Ti sheet exhibited an ultimate tensile strength of 895-915 MPa. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：451 / 454

页数：4

共 14 条

[1] Microstructure and microtexture of highly cold-rolled commercially pure titanium [J].

Bozzolo, N. ;

Dewobroto, N. ;

Wenk, H. R. ;

Wagner, F. .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (07) :2405-2416

[2]

Frost H.J., 1982, DEFORMATION MECH MAP, P44

[3] Finite element analysis of severe deformation in Mg-3Al-1Zn sheets through differential-speed rolling with a high speed ratio [J].

Ji, Y. H. ;

Park, J. J. ;

Kim, W. J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 :570-574

[4] Realization of low-temperature superplasticity in Mg-Al-Zn alloy sheets processed by differential speed rolling [J].

Kim, W. J. ;

Park, J. D. ;

Wang, J. Y. ;

Yoon, W. S. .

SCRIPTA MATERIALIA, 2007, 57 (08) :755-758

[5] Mechanical properties and microstructure of ultra fine-grained copper prepared by a high-speed-ratio differential speed rolling [J].

Kim, W. J. ;

Lee, K. E. ;

Choi, S. -H. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 506 (1-2) :71-79

[6] Synthesis of ultra high strength Al-Mg-Si alloy sheets by differential speed rolling [J].

Kim, W. J. ;

Wang, J. Y. ;

Choi, S. O. ;

Choi, H. J. ;

Sohn, H. T. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 520 (1-2) :23-28

[7] Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis [J].

Mishra, A. ;

Kad, B. K. ;

Gregori, F. ;

Meyers, M. A. .

ACTA MATERIALIA, 2007, 55 (01) :13-28

[8]

OLSON GB, 1981, SHOCK WAVES HIGH STR, P211

[9] Shear strain accommodation during severe plastic deformation of titanium using equal channel angular pressing [J].

Shin, DH ;

Kim, I ;

Kim, J ;

Zhu, YT .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 334 (1-2) :239-245

[10] Influence of post-deformation on CP-Ti processed by equal channel angular pressing [J].

Stolyarov, V. V. ;

Zeipper, L. ;

Mingler, B. ;

Zehetbauer, M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 476 (1-2) :98-105

← 1 2 →