A NEA review on innovative structural materials solutions, including advanced manufacturing processes for nuclear applications based on technology readiness assessment

被引：15

作者：

Balbaud, F. ^{[1
]}

Cabet, C. ^{[1
]}

Cornet, S. ^{[2
]}

Dai, Y. ^{[3
]}

Gan, J. ^{[4
]}

Mayoral, M. Hernandez ^{[5
]}

Hernandez, R. ^{[5
]}

Jianu, A. ^{[6
]}

Malerba, L. ^{[5
]}

Maloy, S. A. ^{[7
]}

Marrow, J. ^{[8
]}

Ohtsuka, S. ^{[9
]}

Okubo, N. ^{[9
]}

Pouchon, M. A. ^{[3
]}

Puype, A. ^{[10
]}

Stergar, E. ^{[11
]}

Serrano, M. ^{[5
]}

Terentyev, D. ^{[11
]}

Wang, Y. G. ^{[12
]}

Weisenburger, A. ^{[6
]}

机构：

[1] Univ Paris Saclay, CEA, F-91191 Gif Sur Yvette, France

[2] Nucl Energy Agcy, 46 Quai A Gallo, F-92100 Boulogne Billancourt, France

[3] Paul Scherrer Inst, CH-5232 Villigen, Switzerland

[4] Idaho Natl Lab, Idaho Falls, ID 83415 USA

[5] CIEMAT, Ave Complutense 22, Madrid 28020, Spain

[6] KIT, Inst Pulsed Power & Microwave Technol, Hermann von Helmholtz Pl 1, D-76344 Eggenstein Leopoldshafen, Germany

[7] LANL, Los Alamos, NM 87545 USA

[8] Univ Oxford, Dept Mat, Parks Rd, Oxford OX1 3PH, England

[9] JAEA, 4002 Narita Cho, Oarai, Ibaraki, Japan

[10] OCAS, Technol Pk 903, B-9052 Zwijnaarde, Belgium

[11] Belgian Nucl Res Ctr, Inst Nucl Mat Sci, Boeretang 200, B-2400 Mol, Belgium

[12] Peking Univ, Sch Phys, Beijing, Peoples R China

来源：

NUCLEAR MATERIALS AND ENERGY | 2021年 / 27卷

关键词：

Advanced manufacturing processes; Innovative materials solution; Nuclear applications; Technology readiness assessement; Review; HIGH-ENTROPY ALLOYS; MECHANICAL-PROPERTIES; MICROSTRUCTURE; DESIGN; CHALLENGES; CORROSION; FUEL;

D O I：

10.1016/j.nme.2021.101006

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

The Nuclear Energy Agency (NEA) Expert Group on Innovative Structural Materials (EGISM) was established in 2008 under the guidance of the Nuclear Science Committee (NSC). Its objectives are to conduct joint and comparative studies to support the development, selection and characterisation of innovative structural materials that can be implemented in advanced nuclear fuel cycles, under long service lifetime and extreme conditions, such as high temperature, high dose/dose rate and corrosive chemical environments. In this context of growing interest and initiatives, the EGISM initiated at the beginning of 2018 an activity among its members to: Identify, in a non-exhaustive way, the currently existing programs on innovative materials and fabrication processes in NEA member countries and China; Establish a first cartography of the activities that are underway on these topics and identify common subjects and thematic; Propose a Technology Readiness Level scale to estimate the maturity of both innovative materials and fabrication processes; Carry out a reflection on what the enablers are to quickly climb this TRL scale, as well as the obstacles, in order to identify solutions to overcome them. This paper first gives definitions shared between the EGISM members on what are considered as advanced structural materials solutions. Next, some international initiatives for the accelerated development of high performance materials are presented both in non-nuclear and nuclear fields. Then, the methodology adopted for technology readiness assessment is explained. A non-exhaustive synthesis of the projects identified among the EGISM members on innovative structural materials and advanced manufacturing solutions such as additive manufacturing is presented. The TRL level of these projects is evaluated. A focus is also made on some of these projects to illustrate and explain the TRLs chosen as well as highlighting enablers or obstacles identified to climbing up the TRL scale.

引用

页数：13

共 55 条

[31]

Ohtsuka S, 2020, P GIF S 2018, P305

[32] European materials development: Results and perspective [J].

Pintsuk, Gerald ;

Diegele, Eberhard ;

Dudarev, Sergei L. ;

Gorley, Michael ;

Henry, Jean ;

Reiser, Jens ;

Rieth, Michael .

FUSION ENGINEERING AND DESIGN, 2019, 146 :1300-1307

[33]

Pouchon M, 2019, NEA INT WORKSH STRUC

[34] Effect of W and N on mechanical properties of reduced activation ferritic/martensitic EUROFER-based steel grades [J].

Puype, A. ;

Malerba, L. ;

De Wispelaere, N. ;

Petrov, R. ;

Sietsma, J. .

JOURNAL OF NUCLEAR MATERIALS, 2018, 502 :282-288

[35] Effect of processing on microstructural features and mechanical properties of a reduced activation ferritic/martensitic EUROFER steel grade [J].

Puype, A. ;

Malerba, L. ;

De Wispelaere, N. ;

Petrov, R. ;

Sietsma, J. .

JOURNAL OF NUCLEAR MATERIALS, 2017, 494 :1-9

[36] Corrosion of Additively Manufactured Alloys: A Review [J].

Sander, G. ;

Tan, J. ;

Balan, P. ;

Gharbi, O. ;

Feenstra, D. R. ;

Singer, L. ;

Thomas, S. ;

Kelly, R. G. ;

Scully, J. R. ;

Birbilis, N. .

CORROSION, 2018, 74 (12) :1318-1350

[37]

Schuster F, 2019, NEA INT WORKSH STRUC

[38] Pressurized resistance welding technology development in 9Cr-ODS martensitic steels [J].

Seki, M ;

Hirako, K ;

Kono, S ;

Kihara, Y ;

Kaito, T ;

Ukai, S .

JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :1534-1538

[39]

Shepherd D, 2014, NUCL ENG INT, V59, P32

[40]

Shi H., 2020, THESIS KIT, DOI [10.5445/IR/1000105453, DOI 10.5445/IR/1000105453]

← 1 2 3 4 5 6 →