Effect of pulse electrodeposition parameters on microhardness of Ni-ZrO2-CeO2 nanocomposite coating

被引：0
作者：
Liu, Shuangshuang [1 ]
Xue, Yujun [1 ,2 ]
Xu, Yangyang [1 ]
Li, Jishun [2 ]
机构：
[1] Henan Univ Sci & Technol, Sch Mechatron Engn, Luoyang 471003, Peoples R China
[2] Henan Univ Sci & Technol, Henan Key Lab Machinery Design & Transmiss Syst, Luoyang 471003, Peoples R China
来源：
MODERN TECHNOLOGIES IN MATERIALS, MECHANICS AND INTELLIGENT SYSTEMS | 2014年 / 1049卷
基金：
中国国家自然科学基金;
关键词：
Electrodeposition; Nanocomposite Coating; Ni-ZrO2-CeO2; Microhardness;
D O I：
10.4028/www.scientific.net/AMR.1049-1050.31
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ni-ZrO2-CeO2 nanocomposite coating was prepared by pulse electrodeposition. The effect of addition of ZrO2 and CeO2 nanoparticles, average current density, duty cycle and pulse current on microhardness of Ni-ZrO2-CeO2 nanocomposites were studied. The results show that microhardness of nanocomposite is increased at first and then decreased with the increasing additive amounts of two kinds of nanoparticles. With increasing reverse the average current density, the microhardness of the composite coating increases. Also, the microhardness of nanocomposite fall with the increasing of pulse frequency. With the positive duty ratio increasing, the microhardness of the composite coating increase at first and then decreased, but with the increasing of the reverse duty ratio, the microhardness of nanocomposite coating is gradually decreased.
引用
收藏
页码：31 / +
页数：2
相关论文
共 50 条
  • [21] Oxidation and wear resistance of Ni-Y2O3-ZrO2 nanocomposite coating prepared by ultrasonic electrodeposition
    Xue, Y. J.
    Shen, C.
    Li, J. S.
    Liu, Y.
    MANUFACTURING AUTOMATION TECHNOLOGY DEVELOPMENT, 2011, 455 : 427 - 430
  • [22] Electrodeposition and characterization of Ni-W/ZrO2 nanocomposite coatings
    Zhao, Chunmei
    Yao, Yingwu
    He, Liang
    BULLETIN OF MATERIALS SCIENCE, 2014, 37 (05) : 1053 - 1058
  • [23] Electrodeposition and characterization of Ni-W/ZrO2 nanocomposite coatings
    Chunmei Zhao
    Yingwu Yao
    Liang He
    Bulletin of Materials Science, 2014, 37 : 1053 - 1058
  • [24] The effect of bath temperature on the crystallite size and microstructure of Ni-CeO2 nanocomposite coating
    Sen, Ranjan
    Das, Siddhartha
    Das, Karabi
    MATERIALS CHARACTERIZATION, 2011, 62 (03) : 257 - 262
  • [25] Synthesis and Properties of Pulse Electrodeposited Ni-CeO2 Nanocomposite
    Ranjan Sen
    Siddhartha Das
    Karabi Das
    Metallurgical and Materials Transactions A, 2012, 43 : 3809 - 3823
  • [26] FABRICATION AND TRIBOLOGICAL BEHAVIOR OF NI-ZRO2 NANOCOMPOSITE COATINGS PREPARED BY ELECTRODEPOSITION IN ULTRASONIC FIELD
    Xue, Yu-Jun
    Liu, Chun-Yang
    Li, Ji-Shun
    Ma, Wei
    Sui, Xin
    Yang, Fang
    Ma, Xi-Qiang
    INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 4, 2016,
  • [27] Effect of pulse parameters on the morphology of electroplated Ni-W-TiC nanocomposite coating
    Moein, A.
    Rastegari, S.
    SURFACE ENGINEERING, 2020, 36 (09) : 982 - 989
  • [28] A STUDY ON Ni-Al2O3 NANOCOMPOSITE COATING PREPARED BY JET ELECTRODEPOSITION
    Chen, Jinsong
    Huang, Yinhui
    Wei, Chanzhou
    Qiao, Bin
    Yang, Jianming
    He, Yiqiang
    ADVANCED COMPOSITES LETTERS, 2010, 19 (05) : 184 - 188
  • [29] Electrodeposition and characterisation of Cu-CeO2 nanocomposite coatings
    Ramalingam, S.
    Muralidharan, V. S.
    Subramania, A.
    SURFACE ENGINEERING, 2013, 29 (07) : 511 - 515
  • [30] CORROSION BEHAVIOR OF A Ni-TiO2 NANOCOMPOSITE COATED BY PULSE ELECTRODEPOSITION
    Sivaraman, V.
    Saravanakumar, N.
    Rajaram, Gukan
    Arunachalam, R. M.
    Venkatesan, S.
    HIGH TEMPERATURE MATERIAL PROCESSES, 2018, 22 (04): : 219 - 229
12345