Effects of Nb content on the microstructure and magnetic properties of Fe-6.5wt.%Si alloy

被引：0

作者：

Cheng, Zhaoyang ^{[1
]}

Liu, Jing ^{[1
]}

Xiang, Zhidong ^{[1
]}

Lin, Xifeng ^{[1
]}

Zhu, Shang ^{[1
]}

Chen, Wensi ^{[1
]}

Zhu, Jiachen ^{[1
]}

机构：

[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Peoples R China

来源：

OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS | 2016年 / 10卷 / 1-2期

关键词：

Fe-6.5 wt.% Si alloy; Nb micro-alloyed; Microstructure; Magnetic properties; HIGH-SILICON STEEL; SI; EVOLUTION; TEXTURE; SHEET; WORKABILITY;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effects of adding different contents of Nb on microstructure and magnetic properties of Fe-6.5wt.%Si alloy were investigated. The results show that the addition of a suitable amount of Nb to Fe-6.5wt.%Si alloys has improved the ductility of the alloy by precipitating Nb-Fe-Si intermetallics. The precipitated Nb-Fe-Si particles have refined the grains and lowering the Si content in the matrix, the latter effect has resulted in the reduction of the ordered phases or the degree of long range order in the alloy. However, when the Nb content is 2.0wt.%, the numbers of precipitates are too high and starting to pin the movement of dislocations, which has an adverse effect on the processability of the alloy. Though the Fe-6.5Si-1.5Nb (wt.%) alloy showed better magnetic properties than the Fe-6.5Si-2.0Nb (wt.%) alloy, the addition of Nb would deteriorate the magnetic properties of Fe-6.5wt.%Si alloy. Thus, the addition of Nb should be less than 1.5 wt.% to balance the processability and magnetic properties of Fe-6.5wt.%Si alloy.

引用

页码：82 / 86

页数：5

共 50 条

[31] Evolution of Microstructure and Ordering in Rolling Process of Fe-6.5 mass% Si Alloy
Li, Hui
Liang, Yong-feng
Ye, Feng
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (05) : 453 - 458
[32] Effect of rolling reduction on microstructure, texture and magnetic properties of twin-roll casting non-oriented 6.5 wt% Si electrical steel
Li, Haoze
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2022, 546
[33] Influence of glass particles incorporation on the microstructure and magnetic properties of Fe-6.5wt% Si alloy subjected to metal injection molding technique
Choi, Dae Yeob
Husein, Syarif
Ko, Young Gun
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 586 : S305 - S309
[34] Microstructure and properties of cost-effective Fe-6.5 wt% Si ribbons fabricated by melt-spinning
Liang, Yongfeng
Wang, Shuai
Qi, Jiakun
Ye, Feng
Lin, Junpin
SCRIPTA MATERIALIA, 2019, 163 : 107 - 110
[35] Improvement of magnetic properties of an Fe-6.5 wt. % Si alloy by directional recrystallization
Zhang, Z. W.
Chen, G.
Bei, H.
Ye, F.
Chen, G. L.
Liu, C. T.
APPLIED PHYSICS LETTERS, 2008, 93 (19)
[36] Magnetic performance and microstructure characterisation of powder metallurgy Fe-6.5 wt-% Si high-silicon steel
Qin, Qian
Li, Guangbang
Yang, Fang
Li, Pei
Chen, Cunguang
Hao, Junjie
Guo, Zhimeng
POWDER METALLURGY, 2022, 65 (04) : 296 - 307
[37] Deformation twinning feature and its effects on significant enhancement of tensile ductility in columnar-grained Fe-6.5wt.%Si alloy at intermediate temperatures
Xie, Jianxin
Fu, Huadong
Zhang, Zhihao
Jiang, Yanbin
INTERMETALLICS, 2012, 23 : 20 - 26
[38] Effects of Cu addition on plasticity of Fe-6.5Si (wt.%) alloy at temperatures below 550 °C
Cheng, Z. Y.
Liu, J.
Xiang, Z. D.
Jia, J.
Bi, Y. J.
INTERMETALLICS, 2020, 120
[39] Study on Compressibility According to Mixing Ratio and Milling Time of Fe-6.5wt.%Si
Kim, Jaemin
Lee, Seonbong
MATERIALS, 2024, 17 (08)
[40] Effect of cerium on the as-cast microstructure and tensile ductility of the twin-roll casting Fe-6.5 wt% Si alloy
Li, Hao-Ze
Liu, Hai-Tao
Wang, Xiang-Long
Cao, Guang-Ming
Li, Cheng-Gang
Liu, Zhen-Yu
Wang, Guo-Dong
MATERIALS LETTERS, 2016, 165 : 5 - 8

← 1 2 3 4 5 →