Effect of boron on intragranular ferrite nucleation mechanism in coarse grain heat-affected zone of high-nitrogen steel

被引：19

作者：

Shi, Zhongran ^{[1
,2
]}

Wang, Jiaji ^{[3
]}

Chai, Xiyang ^{[1
]}

Wang, Shihong ^{[1
]}

Chen, Gang ^{[1
]}

Wang, Ruizhen ^{[1
]}

机构：

[1] Cent Iron & Steel Res Inst, Dept Struct Steels, Beijing 100081, Peoples R China

[2] Yantai CISRI Marine Equipment Mat Appl Technol Co, Yantai 265600, Peoples R China

[3] State Key Lab Met Mat Marine Equipment & Applicat, Anshan 114000, Peoples R China

来源：

MATERIALS LETTERS | 2020年 / 258卷

基金：

国家重点研发计划;

关键词：

Welding; High-nitrogen steel; Boron; CGHAZ; Microstructure; TI; BOUNDARIES; AUSTENITE;

D O I：

10.1016/j.matlet.2019.126819

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of boron on intragranular ferrite (IGF) nucleation mechanism in the simulated coarse grain heated-affected zone (CGHAZ) of a high-nitrogen steel was investigated. When boron (B) was added to the steel, the ferrite transformation temperature increased from 775 degrees C to 800 degrees C and the amount of polygonal ferrite increased from 63.2% to 78.6%. Consequently, the ductile-to-brittle transition temperature decreased from -30 degrees C to -50 degrees C. (Ti,V)(C,N)-MnS-BN, MnS-BN, Al2O3-MnS-BN, and BN served as IGF nucleation sites. The core of the complex precipitates was formed by undissolved (Ti,V)(C,N)-MnS, Al2O3-MnS, and MnS, with a BN cap formed on the undissolved precipitates, which increased the IGF nucleation potency. (C) 2019 Elsevier B.V. All rights reserved.

引用

页数：5

共 16 条

[1] Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C-Mn steel [J].

Byun, JS ;

Shim, JH ;

Cho, YW ;

Lee, DN .

ACTA MATERIALIA, 2003, 51 (06) :1593-1606

[2]

Grange R.A., 1961, T AM SOC METALS, V53

[3] Role of combined addition of niobium and boron and of molybdenum and boron on hardnenability in low carbon steels [J].

Hara, T ;

Asahi, H ;

Uemori, R ;

Tamehiro, H .

ISIJ INTERNATIONAL, 2004, 44 (08) :1431-1440

[4] EVALUATION OF THE NUCLEATION POTENTIAL OF INTRAGRANULAR ACICULAR FERRITE IN STEEL WELDMENTS [J].

LEE, JL .

ACTA METALLURGICA ET MATERIALIA, 1994, 42 (10) :3291-3298

[5] Microstructural Evolution of Boron Nitride Particles in Advanced 9Cr Power Plant Steels [J].

Li, Letian ;

Maclachlan, Ryan ;

Jepson, Mark A. E. ;

Thomson, Rachel .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (07) :3411-3418

[6] OPTIMIZING BORON EFFECT [J].

MELLOY, GF ;

SLIMMON, PR ;

PODGURSKY, PP .

METALLURGICAL TRANSACTIONS, 1973, 4 (10) :2279-2289

[7] CHARACTERISTICS OF HAZ MICROSTRUCTURE IN TI-B TREATED STEEL FOR LARGE HEAT INPUT WELDING [J].

OHNO, Y ;

OKAMURA, Y ;

MATSUDA, S ;

YAMAMOTO, K ;

MUKAI, T .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (08) :1010-1017

[8] Influence of heat treatment on formation behavior of boron nitride inclusions in P122 heat resistant steel [J].

Sakuraya, Kazuyuki ;

Okada, Hirokazu ;

Abe, Fujio .

ISIJ INTERNATIONAL, 2006, 46 (11) :1712-1719

[9] On the Role of Non-metallic Inclusions in the Nucleation of Acicular Ferrite in Steels [J].

Sarma, D. S. ;

Karasev, A. V. ;

Jonsson, P. G. .

ISIJ INTERNATIONAL, 2009, 49 (07) :1063-1074

[10] The mechanism of intragranular ferrite formed on Ti-rich (Ti,V)(C,N) precipitates in the coarse heat affected zone of a V-N-Ti microalloyed steel [J].

Shi, Zhongran ;

Chai, Xiyang ;

Chai, Feng ;

Su, Hang ;

Pan, Tao ;

Wang, Qingfeng ;

Wang, Ruizhen ;

Yang, Caifu .

MATERIALS LETTERS, 2016, 175 :266-270

← 1 2 →