Effects of surface roughness on the mixed thermal elstohydrodynamic lubrication characteristics of surface textured slipper bearing in axial piston pump

被引：8

作者：

Tang, Hesheng ^{[1
,2
]}

Ren, Yan ^{[1
]}

Kumar, Anil ^{[1
]}

机构：

[1] Wenzhou Univ, Sch Mech & Elect Engn, Wenzhou 325035, Peoples R China

[2] Zhejiang Univ, State Key Lab Fluid Power & Mechatron Syst, Hangzhou 310027, Peoples R China

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2022年 / 236卷 / 12期

基金：

中国国家自然科学基金;

关键词：

Axial piston pump; surface roughness; mixed thermoelastohydrodynamic lubrication; surface texture; slipper pair; THRUST BEARING; OPTIMIZATION; PERFORMANCE; SIMULATION; PARAMETERS; SHAFT; WEAR; LOAD;

D O I：

10.1177/13506501221091134

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, a mixed thermal elstohydrodynamic lubrication model is presented for the rough textured slipper bearing in axial piston pump. The autocorrelation function is employed to reveal more detailed information about the tribological performance of the rough textured surfaces in terms of the Skewness and Kurtosis effects and the viscosity change. The effects of surface texturing is represented by the combined root mean-square roughness and asperity height on the optimum texture parameters under the mixed lubrication condition. It is shown that Kurtosis and Skewness have significant effects on the contact performance under different rotational speeds. The optimum dimple depth-over-diameter ratio under mixed lubrication condition are determined at maximized load-carrying capacity and minimized friction coefficient.

引用

页码：2305 / 2327

页数：23

共 44 条

[1] Actual eyring models for thixotropy and shear-thinning: Experimental validation and application to EHD [J].

Bair, S .

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2004, 126 (04) :728-732

[2] An engineering approach for the prediction of wear in mixed lubricated contacts [J].

Beheshti, Ali ;

Khonsari, M. M. .

WEAR, 2013, 308 (1-2) :121-131

[3] Numerical analysis of a surface-textured mechanical seal operating in mixed lubrication regime [J].

Brunetiere, Noel ;

Tournerie, Bernard .

TRIBOLOGY INTERNATIONAL, 2012, 49 :80-89

[4] Multi-objective optimization of micron-scale surface textures for the cylinder/valve plate interface in axial piston pumps [J].

Chen, Yuan ;

Zhang, Junhui ;

Xu, Bing ;

Chao, Qun ;

Liu, Gan .

TRIBOLOGY INTERNATIONAL, 2019, 138 :316-329

[5] Wear simulation for the journal bearings operating under aligned shaft and steady load during start-up and coast-down conditions [J].

Chun, Sang Myung ;

Khonsari, Michael M. .

TRIBOLOGY INTERNATIONAL, 2016, 97 :440-466

[6] Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach [J].

Dobrica, M. B. ;

Fillon, M. ;

Pascovici, M. D. ;

Cicone, T. .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J8) :737-750

[7]

Dowson D., 1966, Elastohydrodynamic Lubrication, the Fundamentals of Roller and Gear Lubrication

[8] Performance comparison between textured, pocket, and tapered-land sector-pad thrust bearings using computational fluid dynamics thermohydrodynamic analysis [J].

Fouflias, Dimitrios G. ;

Charitopoulos, Anastassios G. ;

Papadopoulos, Christos I. ;

Kaiktsis, Lambros ;

Fillon, Michel .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, 229 (04) :376-397

[9]

Greenwood J. A., 1970, Proceedings of the Institution of Mechanical Engineers, V185, P625

[10] Mixed lubrication problems in the presence of textures: An efficient solution to the cavitation problem with consideration of roughness effects [J].

Gu, Chunxing ;

Meng, Xianghui ;

Xie, Youbai ;

Zhang, Di .

TRIBOLOGY INTERNATIONAL, 2016, 103 :516-528

← 1 2 3 4 5 →