Effect of Si addition on microstructure and properties of magnesium alloys with high Al and Zn contents

被引:47
作者
Wang, M. [1 ]
Xiao, D. H. [1 ,2 ]
Liu, W. S. [1 ,2 ]
机构
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
[2] Cent S Univ, Sci & Technol High Strength Struct Mat, Changsha 410083, Hunan, Peoples R China
关键词
Degradable magnesium alloys; Microstructure; Mechanical properties; Corrosion behavior; DIE-CAST MAGNESIUM; CORROSION BEHAVIOR; MECHANICAL-PROPERTIES; MG2SI PARTICLES; TEMPERATURE; STRENGTH; MODULUS; AZ91;
D O I
10.1016/j.vacuum.2017.04.005
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In order to assess the possibility of using magnesium alloys with high Al and Zn contents as degradable fracturing balls, the effects of Si addition on microstructures, mechanical properties and degradable behavior of Mg-17A1-5Zn (mass.%) alloy were investigated. The results show that the minor Si addition can refine alpha-Mg matrix and modify Mg2Si particles. With the increase of Si content, the yield strength of the alloys initially increases and reaches to the maximum 309 MPa in alloy containing 0.5 wt % Si. The degradable corrosion rate exhibits an inverse trend and reaches the maximum in alloy containing 3 wt % Si with 0.46 mm/day at 298 K and 5.39 mm/day at 366 K, respectively. 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:144 / 151
页数:8
相关论文
共 38 条
[11]   Electrochemical Behavior and Localized Corrosion Associated with Mg2Si Particles in Al and Mg Alloys [J].
Gupta, R. K. ;
Sukiman, N. L. ;
Fleming, K. M. ;
Gibson, M. A. ;
Birbilis, N. .
ECS ELECTROCHEMISTRY LETTERS, 2012, 1 (01) :C1-C3
[12]   Hall-Petch relation and boundary strengthening [J].
Hansen, N .
SCRIPTA MATERIALIA, 2004, 51 (08) :801-806
[13]   Increasing elastic modulus, strength and CTE of AZ91 by reinforcing pure magnesium with elemental copper [J].
Hassan, SF ;
Ho, KF ;
Gupta, M .
MATERIALS LETTERS, 2004, 58 (16) :2143-2146
[14]   Effects of Nd addition on microstructure and mechanical properties of Mg-6Zn-1Mn-4Sn alloy [J].
Hu, Guangshan ;
Zhang, Dingfei ;
Tang, Tian ;
Shen, Xia ;
Jiang, Luyao ;
Xu, Junyao ;
Pan, Fusheng .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 634 :5-13
[15]   Factors affecting the fracture strength and Young's modulus of CVD diamond-coated fibres [J].
Kalaugher, E ;
Everitt, NM ;
Nicholson, ED .
DIAMOND AND RELATED MATERIALS, 1997, 6 (5-7) :826-829
[16]   Influence of alloyed Al on the microstructure and corrosion properties of extruded Mg-8Sn-1Zn alloys [J].
Kim, Hyeon Ju ;
Kim, Beomcheol ;
Baek, Soo-Min ;
Sohn, So-Dam ;
Shin, Hyung-Joon ;
Jeong, Hu Young ;
Yim, Chang Dong ;
You, Bong Sun ;
Ha, Heon-Young ;
Park, Sung Soo .
CORROSION SCIENCE, 2015, 95 :133-142
[17]   Modification of Mg2Si morphology in squeeze cast Mg-Al-Zn-Si alloys by Ca or P addition [J].
Kim, JJ ;
Kim, DH ;
Shin, KS ;
Kim, NJ .
SCRIPTA MATERIALIA, 1999, 41 (03) :333-340
[18]   Stability analysis of the Mg2Si phase in AA 6061 aluminum alloy. [J].
Linardi, E. ;
Haddad, R. ;
Lanzani, L. .
11TH INTERNATIONAL CONGRESS ON METALLURGY & MATERIALS SAM/CONAMET 2011, 2012, 1 :550-557
[19]   Some particularities of the corrosion behaviour of Mg-Zn-Mn-Si-Ca alloys in alkaline chloride solutions [J].
Lisitsyn, V. ;
Ben-Hamu, G. ;
Eliezer, D. ;
Shin, K. S. .
CORROSION SCIENCE, 2010, 52 (07) :2280-2290
[20]  
Mordike B.L., 2000, Magnesium Alloys and their application, in