Effect of additive elements on the glass forming ability and crystallization of Zr-Ti-Cu-Ni metallic glasses

被引：4
|
作者：
Choi, CJ
Yang, HU
Kim, BK
Ahn, JH
机构：
[1] Korea Inst Machinery & Mat, Dept Mat Engn, Kyungnam 641010, South Korea
[2] Andong Natl Univ, Dept Mat Engn, Andong 760749, South Korea
来源：
METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2 | 2000年 / 343-3卷
关键词：
amorphous alloy; bulk metallic glass; crystallization; Zr-Ti-Cu-Ni based alloys;
D O I：
10.4028/www.scientific.net/MSF.343-346.109
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Zr-Ti-Cu-Ni-X (X=B, P, and Si) amorphous alloys with a large supercooled liquid region have been prepared by melt spinning. The effect of additive elements (B, P and Si) on the glass formation ability and thermal stability was examined. The glass transition temperature, crystallization temperature increased with increasing the content of these additive elements, while supercooled liquid region decreased. The Si containing alloys exhibited the largest supercooled liquid region which is comparable to that of the commercial Zr-Ti-Cu-Ni-Be alloy. This is thought to be due to the random atomic packing configuration with an optimum atomic size ratio. On the other hand, the highest thermal stability against a crystallization was observed in the P containing alloys.
引用
收藏
页码：109 / 115
页数：7
相关论文
共 50 条
  • [1] Effect of additive elements on the glass forming ability and crystallization of Zr-Ti-Cu-Ni metallic glasses
    Choi, C.J.
    Yang, H.U.
    Kim, B.K.
    Ahn, J.-H.
    Materials Science Forum, 2000, 343
  • [2] The effect of in addition on the glass-forming ability in Cu-Ti-Zr-Ni-Si metallic glasses
    Park, ES
    Kim, WT
    Kim, DH
    MATERIALS TRANSACTIONS, 2004, 45 (08) : 2693 - 2696
  • [3] Glass forming ability and thermodynamics of new Ti-Cu-Ni-Zr bulk metallic glasses
    Li, Peiyou
    Wang, Gang
    Ding, Ding
    Shen, Jun
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2012, 358 (23) : 3200 - 3204
  • [4] Glass-forming ability and crystallization behavior of Ti-Cu-Ni-Sn-M (M=Zr, Mo, and Ta) metallic glasses
    He, G. (guoheifw@hotmail.com), 1816, American Institute of Physics Inc. (95):
  • [5] Glass-forming ability and crystallization behavior of Ti-Cu-Ni-Sn-M (M=Zr, Mo, and Ta) metallic glasses
    He, G
    Eckert, J
    Hagiwara, M
    JOURNAL OF APPLIED PHYSICS, 2004, 95 (04) : 1816 - 1821
  • [6] Thermal stability, microstructure and crystallization kinetics of melt-spun Zr-Ti-Cu-Ni metallic glass
    Scudino, S.
    Venkataraman, S.
    Eckert, J.
    Journal of Alloys and Compounds, 2008, 460 (1-2): : 263 - 267
  • [7] Glass forming ability and crystallization of Zr-Cu-Ag-Al-Be bulk metallic glasses
    Xu, F.
    Lou, H. B.
    Wang, X. D.
    Ding, S. Q.
    Cao, Q. P.
    Jiang, J. Z.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (37) : 9034 - 9037
  • [8] Thermal stability, microstructure and crystallization kinetics of melt-spun Zr-Ti-Cu-Ni metallic glass
    Scudino, S.
    Venkataraman, S.
    Eckert, J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 460 (1-2) : 263 - 267
  • [9] Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability
    杨英俊
    康福伟
    邢大伟
    孙剑飞
    沈庆克
    沈军
    TransactionsofNonferrousMetalsSocietyofChina, 2007, (01) : 16 - 20
  • [10] Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties
    Wang, Yan-Ling
    Xu, Jian
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (12): : 2990 - 2997
12345