Adhesively Bonded Repair Proposal for Wood Members Damaged by Horizontal Shear Using Carbon-Epoxy Patches

被引：13

作者：

Campilho, R. D. S. G. ^{[1
]}

de Moura, M. F. S. F. ^{[1
]}

Ramantani, D. A. ^{[1
]}

Morais, J. J. L. ^{[2
]}

Barreto, A. M. J. P. ^{[1
]}

Domingues, J. J. M. S. ^{[3
]}

机构：

[1] Univ Porto, Dept Engn Mech, Fac Engn, P-4200465 Oporto, Portugal

[2] CITAB UTAD, Dept Engn, Vila Real, Portugal

[3] Inst Super Engn Porto, Dept Engn Mecan, Oporto, Portugal

来源：

JOURNAL OF ADHESION | 2010年 / 86卷 / 5-6期

关键词：

Cohesive zone models; Composite; Finite element analysis; Repair; Wood; FRACTURE CHARACTERIZATION; POLYMER COMPOSITES; BEHAVIOR; JOINTS; REINFORCEMENT; STRENGTH; CROSSTIE; FAILURE; SINGLE; CHECKS;

D O I：

10.1080/00218464.2010.484318

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this work, a repair technique with adhesively bonded carbon-epoxy patches is proposed for wood members damaged by horizontal shear and under bending loads. This damage is characterized by horizontal crack growth near the neutral plane of the wood beam, normally originating from checks and shakes. The repair consists of adhesively bonded carbon-epoxy patches on the vertical side faces of the beam at the cracked region to block sliding between the beam arms. An experimental and numerical parametric analysis was performed on the patch length. The numerical analysis used the finite element method (FEM) and cohesive zone models (CZMs), with an inverse modelling technique for the characterization of the adhesive layer. Trapezoidal cohesive laws in each pure mode were used to account for the ductility of the adhesive used. To fully reproduce the tests, horizontal damage propagation within the wood beam was also simulated. A good correlation with the experiments was found. Regarding the effectiveness of the repair, for the conditions selected for this work, a full strength recovery was achieved for the bigger value of patch length tested.

引用

页码：649 / 670

页数：22

共 65 条

[1]

AKBIYIK A, 2005, THESIS TULANE U NEW

[2] Feasibility investigation of the shear repair of timber stringers with horizontal splits [J].

Akbiyik, Arda ;

Lamanna, Anthony J. ;

Hale, William Micah .

CONSTRUCTION AND BUILDING MATERIALS, 2007, 21 (05) :991-1000

[3] Mechanical repair of timber beams fractured in flexure using bonded-in reinforcements [J].

Alam, Parvez ;

Ansell, Martin P. ;

Smedley, Dave .

COMPOSITES PART B-ENGINEERING, 2009, 40 (02) :95-106

[4] Fiber-reinforced polymer composites for construction-state-of-the-art review [J].

Bakis, CE ;

Bank, LC ;

Brown, VL ;

Cosenza, E ;

Davalos, JF ;

Lesko, JJ ;

Machida, A ;

Rizkalla, SH ;

Triantafillou, TC .

JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2002, 6 (02) :73-87

[5] Differences in wood properties between juvenile wood and mature wood in 10 species grown in China [J].

Bao, FC ;

Jiang, ZH ;

Jiang, XM ;

Lu, XX ;

Luo, XQ ;

Zhang, SY .

WOOD SCIENCE AND TECHNOLOGY, 2001, 35 (04) :363-375

[6] Size effect aspects of measurement of fracture characteristics of quasibrittle material [J].

Bazant, ZP .

ADVANCED CEMENT BASED MATERIALS, 1996, 4 (3-4) :128-137

[7]

Bodig J., 1993, Mechanics of wood and composites

[8]

Bodig J., 1982, MECH WOOD WOOD COMPO

[9] Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs [J].

Campilho, R. D. S. G. ;

de Moura, M. F. S. F. ;

Domingues, J. J. M. S. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2008, 45 (05) :1497-1512

[10] Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining [J].

Campilho, R. D. S. G. ;

de Moura, M. F. S. F. ;

Barreto, A. M. J. P. ;

Morais, J. J. L. ;

Domingues, J. J. M. S. .

CONSTRUCTION AND BUILDING MATERIALS, 2010, 24 (04) :531-537

← 1 2 3 4 5 6 7 →