A method for dynamic fracture toughness determination using short beams

This paper deals with dynamic fracture toughness testing of small beam specimens. The need for testing such specimens is often dictated by the characteristic dimensions of the end product. We present a new methodology which combines experimentally determined loads and fracture time, together with a numerical model of the specimen. Calculations are kept to a minimum by virtue of the linearity of the problem. The evolution of the stress intensity factor (SIF) is obtained by convolving the applied load with the calculated specimen response to unit impulse force. The fracture toughness is defined as the value of the SIF at fracture time. The numerical model is first tested by comparing numerical and analytical solutions (Kishimoto et al., 1990) of the impact loaded beam. One point impact experiments were carried out on of commercial tungsten base heavy alloy specimens. The robustness of the method is demonstrated by comparing directly measured stress intensity factors with the results of the hybrid experimental-numerical calculation. The method is simple to implement, computationally inexpensive, and allows testing of large sample sizes, without restriction on the specimen geometry and type of loading.