Coupling effect and characterization modeling of iron ore fines mixing and granulating at 0-1 mm

被引:3
作者
Liu, Dai-fei [1 ]
Shi, Xian-ju [2 ]
Tang, Chao-jun [1 ]
Cao, Hai-peng [1 ]
Li, Jun [2 ]
机构
[1] Changsha Univ Sci & Technol, Sch Energy & Power Engn, Changsha, Hunan, Peoples R China
[2] Wuhan Iron Sr Steel Co Ltd, R&D Ctr, Baosteel Cent Res Inst, Ironmaking Sect,Wuhan Branch, Wuhan 430000, Hubei, Peoples R China
基金
中国国家自然科学基金;
关键词
Iron ore; Granulating; Coupling effect; Modeling; Random forest algorithm; DEM SIMULATION; SEGREGATION; REPOSE; ANGLE;
D O I
10.1007/s42243-019-00330-x
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Characteristic of iron ore is the essential factor of granulating. Three ores, namely specularite, magnetite concentrate and limonite, were selected as adhesion powder to investigate granulating behavior and evolution process of agglomeration. Experiments and modeling were performed to represent granulating behavior on the basis of selectivity, ballability and adhesion rate. The mass fraction of water and particles size of adhesion and nucleation were set at (11 +/- 1)%, 0-1 mm and 3-5 mm, respectively. Experimental results show that selectivity and ballability promote the evolution of granulation. The water absorption rate of specularite and the ballability of limonite are better. The coupling effects exist in two ores mixing and present positive effect when the proportion of magnetite concentrate is greater than that of specularite or specularite and limonite blend. During three ores mixing, the coupling effect presents a complex superposition state. A characterization model of adhesion rate of mixing granulation was established by random forest algorithms. Its output is adhesion rate, and its inputs include water absorption rate, balling index and mixing proportion. The model parameters are 957 trees and four branches, and the training and prediction errors of the model are 2.3% and 3.7%, respectively. Modeling indicates that the random forest model can be used to represent coupling effects of mixing granulation.
引用
收藏
页码:1154 / 1161
页数:8
相关论文
共 27 条
  • [1] Automatic characterization of iron ore by digital microscopy and image analysis
    Alvarez Iglesias, Julio Cesar
    Augusto, Karen Soares
    Martins Gomes, Otavio da Fonseca
    Alcantara Domingues, Alei Leite
    Vieira, Maria Beatriz
    Casagrande, Catia
    Paciornik, Sidnei
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2018, 7 (03): : 376 - 380
  • [2] Contact parameter estimation for DEM simulation of iron ore pellet handling
    Barrios, Gabriel K. P.
    de Carvalho, Rodrigo M.
    Kwade, Arno
    Tavares, Luis Marcelo
    [J]. POWDER TECHNOLOGY, 2013, 248 : 84 - 93
  • [3] Random forests
    Breiman, L
    [J]. MACHINE LEARNING, 2001, 45 (01) : 5 - 32
  • [4] [代书华 Dai Shuhua], 2010, [钢铁, Iron and Steel], V45, P20
  • [5] Image analysis estimation of iron ore particle segregation in epoxy blocks
    Donskoi, E.
    Raynlyn, T. D.
    Poliakov, A.
    [J]. MINERALS ENGINEERING, 2018, 120 : 102 - 109
  • [6] Comparative study of iron ore characterisation using a scanning electron microscope and optical image analysis
    Donskoi, E.
    Manuel, J.
    Austin, P.
    Poliakov, A.
    Peterson, M.
    Hapugoda, S.
    [J]. TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION B-APPLIED EARTH SCIENCE, 2013, 122 (04): : 217 - 229
  • [7] [范晓慧 Fan Xiaohui], 2012, [北京科技大学学报, Journal of University Science and Technology Beijing], V34, P373
  • [8] Fu JY, 1997, PELLETIZATION AGGLOM
  • [9] DEM simulation on the packing of fine ellipsoids
    Gan, J. Q.
    Yu, A. B.
    Zhou, Z. Y.
    [J]. CHEMICAL ENGINEERING SCIENCE, 2016, 156 : 64 - 76
  • [10] Gao WM, 1995, IRON STEEL, V30, P1