Stainless Steel Mesh Supported Carbon Nanofibers for Electrode in Bioelectrochemical System

被引：3
|
作者：
Wang, Jing [1 ]
Li, Ming [1 ]
Liu, Fangtai [2 ]
Chen, Shuiliang [1 ]
机构：
[1] Jiangxi Normal Univ, Dept Chem & Chem Engn, Nanchang 330022, Peoples R China
[2] Nanchang Univ, Inst Adv Study, Nanchang 330031, Peoples R China
来源：
JOURNAL OF NANOMATERIALS | 2016年 / 2016卷
基金：
中国国家自然科学基金;
关键词：
PERFORMANCE; ANODE; BIOFILM; CATHODE; FELT;
D O I：
10.1155/2016/4246568
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
We proposed a self-connected carbon nanofiber design for electrode in microbial bioelectrochemical system. This design was realized by direct growth of carbon nanofibers (CNFs) onto stainless steel (SSM) via a chemical vapor deposition process without addition of any external catalysts. In the CNFs-SSM composite electrode, the SSM acted as the conductive network and ensured efficient substrate and proton transfer, and the CNFs layer served as highly porous habitats for thick biofilm propagation. The current generated by the CNFs-SSM was 200 times higher than the bare SSM under the same experimental conditions. This provided a simple and promising method for preparation of electrode material with high performance and low-cost in bioelectrochemical system.
引用
收藏
页数：5
相关论文
共 50 条
  • [21] Carbon Fibers for Bioelectrochemical: Precursors, Bioelectrochemical System, and Biosensors
    Donghao Li
    Yimeng Feng
    Fengxiang Li
    Jingchun Tang
    Tao Hua
    Advanced Fiber Materials, 2023, 5 : 699 - 730
  • [22] Preparation of hydrogenation catalysts supported on stainless steel or carbon fabrics.
    Reymond, JP
    Dubois, D
    Fouilloux, P
    PREPARATION OF CATALYSTS VII, 1998, 118 : 63 - 72
  • [23] Pyrolytic carbon-coated stainless steel felt as a high-performance anode for bioelectrochemical systems
    Guo, Kun
    Hidalgo, Diana
    Tommasi, Tonia
    Rabaey, Korneel
    BIORESOURCE TECHNOLOGY, 2016, 211 : 664 - 668
  • [24] Fabricating advanced asymmetric supercapacitors by flame growing carbon nanofibers on surface engineered stainless steel electrode and modulating the redox active electrolyte
    Lin, Jian-hao
    Wang, Xingyao
    Lin, Zhidan
    Vogel, Florian
    Du, Xusheng
    SURFACE & COATINGS TECHNOLOGY, 2022, 431
  • [25] Lead ions removal from aqueous solution in a novel bioelectrochemical system with a stainless steel cathode
    Bo, Tao
    Zhang, Lixia
    Zhu, Xiaoyu
    He, Xiaohong
    Tao, Yong
    Zhang, Jintao
    Li, Daping
    RSC ADVANCES, 2014, 4 (77): : 41135 - 41140
  • [26] Carbon Coated Stainless Steel as Counter Electrode for Dye Sensitized Solar
    Prakash, Shejale Kiran
    Sharma, Rakesh K.
    Roy, Mahesh S.
    Kumar, Mahesh
    LIGHT AND ITS INTERACTIONS WITH MATTER, 2014, 1620 : 218 - 222
  • [27] Growth of carbon nanotubes and microfibers over stainless steel mesh by cracking of methane
    Gao, L. Z.
    Kiwi-Minsker, L.
    Renken, A.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (13): : 3029 - 3042
  • [28] Development of aligned carbon nanotubes layers over stainless steel mesh monoliths
    Martinez-Hansen, V.
    Latorre, N.
    Royo, C.
    Romeo, E.
    Garcia-Bordeje, E.
    Monzon, A.
    CATALYSIS TODAY, 2009, 147 : S71 - S75
  • [29] Mechanical evaluation of hip cement spacer reinforcement with stainless steel Kirschner wires, titanium and carbon rods, and stainless steel mesh
    Kaku N.
    Tabata T.
    Tsumura H.
    European Journal of Orthopaedic Surgery & Traumatology, 2015, 25 (3) : 489 - 496
  • [30] Electrodeposition of flexible stainless steel mesh supported ZnO nanorod arrays with enhanced photocatalytic performance
    Wang, Xiaofei
    Lu, Hui
    Liu, Wenwu
    Guo, Min
    Zhang, Mei
    CERAMICS INTERNATIONAL, 2017, 43 (08) : 6460 - 6466
12345