Residual stresses in thermoplastic composites - a study of the literature. Part III: Effects of thermal residual stresses

被引：203
作者：
Parlevliet, Patricia P. [1 ]
Bersee, Harald E. N. [1 ]
Beukers, Adriaan [1 ]
机构：
[1] Delft Univ Technol, Fac Aerosp Engn, NL-2629 HS Delft, Netherlands
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2007年 / 38卷 / 06期
关键词：
polymer matrix composites (PMCs); thermoplastic resin; defects; mechanical properties; fibre/matrix bond; stress relaxation; environmental degradation; filament winding;
D O I：
10.1016/j.compositesa.2006.12.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper is the third part in a series of review papers on residual stresses in thermoplastic composites. The first two parts were dedicated to the formation of thermal residual stresses and experimental techniques to detect these stresses, respectively. This third paper discusses the effects that thermal residual stresses have on the material properties of thermoplastic composites. Composite laminates as well as composite structures were considered. Residual stresses were found to affect the composites' matrix-dominated, mechanical and durability properties, as well as to inflict damage and dimensional instability. Several mechanisms to relieve thermal residual stresses are proposed. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1581 / 1596
页数：16
相关论文
共 199 条
[51]   Thermal effects on polymer matrix composites: Part 1. Thermal cycling [J].
Hancox, NL .
MATERIALS & DESIGN, 1998, 19 (03) :85-91
[52]  
HARRIS B, 1999, ENG COMPOSITE MAT, P79
[53]  
HARRIS B, 1999, ENG COMPOSITES MAT, P261
[54]  
HARRIS B, 1999, ENG COMPOSITE MAT, P179
[55]   THERMAL-EXPANSION COEFFICIENTS OF CRACKED LAMINATES [J].
HASHIN, Z .
COMPOSITES SCIENCE AND TECHNOLOGY, 1988, 31 (04) :247-260
[56]   THERMALLY-INDUCED INTERFACIAL MICROCRACKING IN POLYMER MATRIX COMPOSITES [J].
HIEMSTRA, DL ;
SOTTOS, NR .
JOURNAL OF COMPOSITE MATERIALS, 1993, 27 (10) :1030-1051
[57]  
Highsmith A.L., 1982, DAMAGE COMPOSITE MAT, P103, DOI [10.1520/STP34323S, DOI 10.1520/STP34323S]
[58]   The incorporation of carbon nanofibres to enhance the properties of self reinforced, single polymer composites [J].
Hine, P ;
Broome, V ;
Ward, I .
POLYMER, 2005, 46 (24) :10936-10944
[59]  
HSIAO BS, 1990, CONTROLLED INTERPHASES IN COMPOSITE MATERIALS, P613
[60]   A study of direct cure kinetics characterization during liquid composite molding [J].
Hsiao, KT ;
Little, R ;
Restrepo, O ;
Minaie, B .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (06) :925-933
12345678910