Constitutive Relation for Ambient-Temperature Creep in Hexagonal Close-Packed Metals

被引:35
作者
Matsunaga, Tetsuya [1 ]
Kameyama, Tatsuya [2 ]
Takahashi, Kohei [3 ]
Sato, Eiichi [4 ]
机构
[1] Grad Univ Adv Studies, Dept Space & Astronaut Sci, Sch Phys Sci, Sagamihara, Kanagawa 2298510, Japan
[2] Univ Tokyo, Sch Engn, Dept Mat Engn, Tokyo 1138656, Japan
[3] Tokyo Metropolitan Univ, Dept Aerosp Engn, Sch Syst Design, Tokyo 1910065, Japan
[4] Japan Aerosp Explorat Agcy, Inst Space & Astronaut Sci, Sagamihara, Kanagawa 2298510, Japan
基金
日本学术振兴会;
关键词
titanium; magnesium; zinc; ambient-temperature creep; constitutive relation; DEFORMATION MECHANISM MAP; ROOM-TEMPERATURE; TITANIUM-ALLOYS; MAGNESIUM ALLOYS; GRAIN-BOUNDARIES; ALUMINUM; BEHAVIOR; ALPHA; TI;
D O I
10.2320/matertrans.M2009223
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper reports creep tests on three kinds of polycrystalline hexagonal close-packed metals, i.e. commercially pure titanium, pure magnesium, and pure zinc, in the vicinity of ambient temperature even below their 0.2% proof stresses. These materials showed significant steady state creep rates around 10-9 s(-1) and had stress exponents of about 3.0. Arrhenius plots in the vicinity of ambient temperature indicate extremely low apparent activation energies. Q, of about 20 kJ/mol, which is at least one-fourth of the Q of dislocation-core diffusion. Ambient-temperature creep also has a grain-size effect with an exponent of 1.0. These parameters indicate that ambient-temperature creep is a new creep deformation mechanism in h.c.p. materials. [doi:10.2320/matertrans.M2009223]
引用
收藏
页码:2858 / 2864
页数:7
相关论文
共 40 条
[1]  
Adenstedt H., 1949, MET PROG, V56, P658
[2]   ON DISLOCATION KINETICS [J].
AKULOV, NS .
ACTA METALLURGICA, 1964, 12 (10) :1195-&
[3]  
[Anonymous], C STRENGTH SOL BRIST
[4]  
Boyer R, 1994, MAT PROPERTIES HDB, P233
[5]   Calculation of Debye temperature for crystalline structures - A case study on Ti, Zr, and Hf [J].
Chen, Q ;
Sundman, B .
ACTA MATERIALIA, 2001, 49 (06) :947-961
[7]   Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242 [J].
Deka, Dhyanjyoti ;
Joseph, Deepu S. ;
Ghosh, Somnath ;
Mills, Michael J. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (05) :1371-1388
[8]  
Frost HJ., 1982, DEFORMATION MECH MAP, P43
[9]  
Garofalo F, 1963, FUNDAMENTALS CREEP C
[10]   VISCOUS CREEP OF ALUMINUM NEAR ITS MELTING TEMPERATURE [J].
HARPER, J ;
DORN, JE .
ACTA METALLURGICA, 1957, 5 (11) :654-665