Application of lock-in thermography non destructive technique to CFC armoured plasma facing components

被引：12

作者：

Escourbiac, F. ^{[1
]}

Constans, S. ^{[1
]}

Courtois, X. ^{[1
]}

Durocher, A. ^{[1
]}

机构：

[1] CEA Cadarache, DRFC SIPP, Dept Rech Fus Controlee, Assoc Euratom CEA,DSM, F-13108 St Paul Les Durance, France

来源：

JOURNAL OF NUCLEAR MATERIALS | 2007年 / 367卷

关键词：

D O I：

10.1016/j.jnucmat.2007.04.033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A non destructive testing technique - so called modulated photothermal thermography or lock-in thermography - has been set-up for plasma facing components examination. Reliable measurements of phase contrast were obtained on 8 mm carbon fiber composite (CFC) armoured W7-X divertor component with calibrated flaws. A 3D finite element analysis allowed the correlation of the measured phase contrast and showed that a 4 mm strip flaw can be detected at the CFC/ copper interface. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：1492 / 1496

页数：5

共 7 条

[1] Direct joining of CFC to copper
Appendino, P
Ferraris, M
Casalegno, V
Salvo, M
Merola, M
Grattarola, M
[J]. JOURNAL OF NUCLEAR MATERIALS, 2004, 329 : 1563 - 1566
[2] Water-cooled target modules for steady-state operation of the W7-X divertor
Boscary, J
Greuner, H
Czerwinski, M
Mendelevitch, B
Pfefferle, K
Renner, H
[J]. NUCLEAR FUSION, 2003, 43 (09) : 831 - 834
[3] Quality control of plasma facing components for Tore Supra
Durocher, A
Schlosser, J
Cordier, JJ
Agarici, G
[J]. FUSION ENGINEERING AND DESIGN, 2003, 66-68 : 305 - 309
[4] Acceptance criteria for the ITER divertor vertical target
Fouquet, S
Schlosser, J
Merola, M
Durocher, A
Escourbiac, F
Grosman, A
Missirlian, M
Portafaix, C
[J]. FUSION ENGINEERING AND DESIGN, 2006, 81 (1-7) : 265 - 268
[5] Maillet D, 2000, Thermal Quadrupoles: solving the heat equation through integral transforms
[6] A new inspection method for plasma facing components
Traxler, H.
Schlosser, J.
Durocher, A.
Schedler, B.
Huber, T.
Zabernig, A.
[J]. PHYSICA SCRIPTA, 2004, T111 : 203 - 205
[7] WU D, P QIRT 1996, P251

← 1 →