Investigation on the flow field of W-shape electrolyte flow mode in electrochemical machining

被引：52

作者：

Zhu, Dong ^{[1
]}

Zhu, Di ^{[1
]}

Xu, Zhengyang ^{[1
]}

Xu, Qing ^{[1
]}

Liu, Jia ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China

来源：

JOURNAL OF APPLIED ELECTROCHEMISTRY | 2010年 / 40卷 / 03期

关键词：

Flow field; Electrochemical machining; Blade; Pressure; Cathode;

D O I：

10.1007/s10800-009-0024-y

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

A new W-shape electrolyte flow mode was developed to improve the blade accuracy and surface quality in electrochemical machining. Its mathematical model in the interelectrode gap was obtained as equations of such main flow parameters as the pressure, channel width, volumetric gas-phase concentration, velocity, and temperature. According to the model, the distribution of the flow field was simulated. Subsequently, experiments were carried out so as to validate the W-shape electrolyte flow mode and its mathematical mode. The results proved that the mathematical model was correct, the flow mode was reasonable, and the accuracy and surface quality of blade were enhanced greatly.

引用

页码：525 / 532

页数：8

共 10 条

[1] Experimental investigation on the influence of electrochemical machining parameters on machining rate and accuracy in micromachining domain [J].

Bhattacharyya, B ;

Munda, J .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (13) :1301-1310

[2] Tool design in electrochemical machining considering the effect of thermal-fluid properties [J].

Chang, CS ;

Hourng, LW ;

Chung, CT .

JOURNAL OF APPLIED ELECTROCHEMISTRY, 1999, 29 (03) :321-330

[3] Fundamental aspects and applications of electrochemical microfabrication [J].

Datta, M ;

Landolt, D .

ELECTROCHIMICA ACTA, 2000, 45 (15-16) :2535-2558

[4] The analysis and investigation on the microelectrode fabrication by electrochemical machining [J].

Fan, Zhi-Wen ;

Hourng, Lih-Wu .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (7-8) :659-666

[5]

FAN ZJ, 2005, P CHINA ASS SCI TECH, V204

[6]

McGeough J.A., 1974, Principles of electrochemical machining

[7]

Rajurkar KP, 1999, CIRP ANNALS 1999: MANUFACTURING TECHNOLOGY, VOL 48 NO 2 1999, P567

[8] The surface structure during pulsed ECM of iron in NaNO3 [J].

Rosenkranz, C ;

Lohrengel, MM ;

Schultze, JW .

ELECTROCHIMICA ACTA, 2005, 50 (10) :2009-2016

[9]

XU ZY, 2007, CHIN J MECH ENG, V44, P189

[10]

ZHU D, 1999, J AM SOC MECH ENG, V10, P589

← 1 →