Numerical analysis of natural gas pressure during coal and gas outbursts

Any disturbance in the ventilation system of a mine during a coal and gas outburst can lead to secondary disasters. This is because, on the one hand, the expansion power of the outburst source makes the airflow in the ventilation system countercurrent, causing the gas in this system to exceed the allowable limit. On the other hand, the airflow density changes because of the outburst and the consequent airflow mixing in the mine roadway, thereby changing the natural wind pressure. From this, the concept of natural gas wind pressure is proposed, and a calculation method for this pressure in a 3D model mine ventilation system is derived. For the "11.10" major coal and gas outburst that occurred in Shizhuang Coal Mine in Qujing, Yunnan Province, the entire process of the counter flow and gas dispersion flow in the main and auxiliary shafts is analyzed using the TF1M 3D simulation program, including the dynamic change in the natural wind pressure in the mine in each stage. The simulation shows that during the gas outburst period, the natural gas pressure of the countercurrent circuit is greater than that of the main fan. Between 140 s and 225 s following the outburst, the natural wind pressure once overcomes the fan pressure and reverses the airflow in the 1824 transport roadway, and the gas is withdrawn from the 1727 service point. Evidently, the natural pressure of the gas produced by the outburst affects the mine ventilation system. In the event of a coal and gas outburst in a private village coal mine, if the natural gas wind pressure can be reasonably utilized and the main fan stopped or the entire mine reversed in time, casualties may be minimized. Scholars studying coal and gas outburst mines should pay attention to mine airflow disorder due to the varying natural gas wind pressure when an outburst occurs and perform simulation drills of the outburst beforehand. Thus, a scientific emergency management plan for mine disaster prevention and reduction can be formulated.