Improving fluidization behavior of cohesive Ca(OH)2 adsorbent using hydrophilic silica nanoparticles: Parametric investigation

被引:20
作者
Amjadi, O. [1 ]
Tahmasebpoor, M. [1 ]
机构
[1] Univ Tabriz, Dept Chem & Petr Engn, POB 51666-16471, Tabriz, Iran
来源
PARTICUOLOGY | 2018年 / 40卷
关键词
Fluidization; Ca(OH)(2); Silica nanoparticles; Carbon dioxide adsorption; Taguchi method; HYDROGEN-BOND; TAGUCHI; CO2; OPTIMIZATION; BED; PARTICLES; COMPOSITE; REMOVAL; DESIGN; FORCES;
D O I
10.1016/j.partic.2017.12.004
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Hydrophilic silica nanoparticles were used to enhance the fluidization behavior of Ca(OH)(2) powder and its CO2 adsorption. The strong electrostatic forces were decreased by fluidizing adsorbents modified by hydrophilic SiO2 in the presence of alcohol vapors. A Taguchi experimental design was used to identify the optimal characteristic parameters of the modified adsorbents to improve their fluidization. Four parameters, including SiO2 mass percentage, type of alcohol, sieved size of SiO2, and sieved size of Ca(OH)(2) particles, were selected for conducting experiments in a fluidized bed. Analysis of variance showed that sieved size and mass percentage of SiO2 nanoparticles (accounting for 73.88% and 19.01% of the total contributions, respectively) were the most significant parameters determining fluidization quality of the modified adsorbents. Fluidization experiments confirmed the effectiveness of these two parameters. Based on bed expansion results, fluidization of Ca(OH)(2) modified by hydrophilic silica nanoparticles in the presence of alcohols was considerably better than that modified by hydrophobic nanoparticles. CO2 adsorption tests, which were carried out by measuring the pH variation of pure water during adsorption, revealed that improved Ca(OH)(2) fluidization enhanced the carbonation reaction. (C) 2018 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier By. All rights reserved.
引用
收藏
页码:52 / 61
页数:10
相关论文
共 37 条
  • [11] Heavy metals recovery from industrial wastewater using Taguchi method
    Kaminari, N. M. S.
    Schultz, D. R.
    Ponte, M. J. J. S.
    Ponte, H. A.
    Marino, C. E. B.
    Neto, A. C.
    [J]. CHEMICAL ENGINEERING JOURNAL, 2007, 126 (2-3) : 139 - 146
  • [12] Effect of an acoustic field on bubbling in a gas fluidized bed
    Levy, EK
    Shnitzer, I
    Masaki, T
    Salmento, J
    [J]. POWDER TECHNOLOGY, 1997, 90 (01) : 53 - 57
  • [13] Fluidization behavior of binary mixtures of nanoparticles in vibro-fluidized bed
    Liang, Xizhen
    Duan, Hao
    Zhou, Tao
    Kong, Jiangrong
    [J]. ADVANCED POWDER TECHNOLOGY, 2014, 25 (01) : 236 - 243
  • [14] Applications of Taguchi and design of experiments methods in optimization of chemical mechanical polishing process parameters
    Liao, Hsin-Te
    Shie, Jie-Ren
    Yang, Yung-Kuang
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 38 (7-8) : 674 - 682
  • [15] Comparison of pyrolysis products between coal, coal/CaO, and coal/Ca(OH)2 materials
    Lin, SY
    Harada, M
    Suzuki, Y
    Hatano-, H
    [J]. ENERGY & FUELS, 2003, 17 (03) : 602 - 607
  • [16] Hydrogen production from hydrocarbon by integration of water-carbon reaction and carbon dioxide removal (HyPr-RING method)
    Lin, SY
    Suzuki, Y
    Hatano, H
    Harada, M
    [J]. ENERGY & FUELS, 2001, 15 (02) : 339 - 343
  • [17] Fluidization quality improvement for cohesive particles by fine powder coating
    Liu, H
    Li, Y
    Guo, QJ
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2006, 45 (05) : 1805 - 1810
  • [18] Millan J.M. V., 2012, FLUIDIZATION FINE PO, V18
  • [19] Montgomery D., 2013, DESIGN ANAL EXPT, V8
  • [20] NOWAK W, 1993, AICHE SYM S, V89, P137