Improving fluidization behavior of cohesive Ca(OH)2 adsorbent using hydrophilic silica nanoparticles: Parametric investigation

被引:20
作者
Amjadi, O. [1 ]
Tahmasebpoor, M. [1 ]
机构
[1] Univ Tabriz, Dept Chem & Petr Engn, POB 51666-16471, Tabriz, Iran
来源
PARTICUOLOGY | 2018年 / 40卷
关键词
Fluidization; Ca(OH)(2); Silica nanoparticles; Carbon dioxide adsorption; Taguchi method; HYDROGEN-BOND; TAGUCHI; CO2; OPTIMIZATION; BED; PARTICLES; COMPOSITE; REMOVAL; DESIGN; FORCES;
D O I
10.1016/j.partic.2017.12.004
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Hydrophilic silica nanoparticles were used to enhance the fluidization behavior of Ca(OH)(2) powder and its CO2 adsorption. The strong electrostatic forces were decreased by fluidizing adsorbents modified by hydrophilic SiO2 in the presence of alcohol vapors. A Taguchi experimental design was used to identify the optimal characteristic parameters of the modified adsorbents to improve their fluidization. Four parameters, including SiO2 mass percentage, type of alcohol, sieved size of SiO2, and sieved size of Ca(OH)(2) particles, were selected for conducting experiments in a fluidized bed. Analysis of variance showed that sieved size and mass percentage of SiO2 nanoparticles (accounting for 73.88% and 19.01% of the total contributions, respectively) were the most significant parameters determining fluidization quality of the modified adsorbents. Fluidization experiments confirmed the effectiveness of these two parameters. Based on bed expansion results, fluidization of Ca(OH)(2) modified by hydrophilic silica nanoparticles in the presence of alcohols was considerably better than that modified by hydrophobic nanoparticles. CO2 adsorption tests, which were carried out by measuring the pH variation of pure water during adsorption, revealed that improved Ca(OH)(2) fluidization enhanced the carbonation reaction. (C) 2018 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier By. All rights reserved.
引用
收藏
页码:52 / 61
页数:10
相关论文
共 37 条
  • [1] Barbagini F., 2009, FUNDAMENTAL STUDY PA
  • [2] Determining optimal operation parameters for reducing PCDD/F emissions (I-TEQ values) from the iron ore sintering process by using the Taguchi experimental design
    Chen, Yu-Cheng
    Tsai, Perng-Jy
    Mou, Jin-Luh
    [J]. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2008, 42 (14) : 5298 - 5303
  • [3] Fluidization of coated group C powders
    Chen, Yuhua
    Yang, Jun
    Dave, Rajesh N.
    Pfeffer, Robert
    [J]. AICHE JOURNAL, 2008, 54 (01) : 104 - 121
  • [4] Chirone R., 1992, Fluidization, VVII, P545
  • [5] DUTTA A, 1991, AICHE SYM S, V87, P38
  • [6] Color removal from textile dyebath effluents in a zeolite fixed bed reactor: Determination of optimum process conditions using Taguchi method
    Engin, Ahmet Baki
    Ozdemir, Ozgur
    Turan, Mustafa
    Turan, Abdullah Z.
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2008, 159 (2-3) : 348 - 353
  • [7] Fraley S., 2006, The Michigan chemical process dynamic and controls open text book, USA, V2, P4
  • [8] Haynes W.M., 2016, CRC Handbook of Chemistry and Physics: A Ready-Reference Book of Chemical and Physical Data, V97th, p2016th
  • [9] VIBRATING BEDS OF FINE PARTICLES - ESTIMATION OF INTERPARTICLE FORCES FROM EXPANSION AND PRESSURE-DROP EXPERIMENTS
    JARAIZ, E
    KIMURA, S
    LEVENSPIEL, O
    [J]. POWDER TECHNOLOGY, 1992, 72 (01) : 23 - 30
  • [10] THE USES OF MAGNETIC-FIELDS IN THE PROCESSING OF SOLIDS
    JARAIZM, E
    LEVENSPIEL, O
    FITZGERALD, TJ
    [J]. CHEMICAL ENGINEERING SCIENCE, 1983, 38 (01) : 107 - 114