Microstructure and Tribological Properties of Self-Lubricating FeS Coating Prepared by Chemical Bath Deposition Coating Technique

被引：5

作者：

Hu, Jianjun ^{[1
,2
]}

He, Chuan ^{[1
]}

Yang, Xian ^{[1
]}

Li, Hui ^{[1
]}

Xu, Hongbin ^{[2
]}

Guo, Ning ^{[3
]}

机构：

[1] Chongqing Univ Technol, Coll Mat Sci & Engn, Chongqing 400054, Peoples R China

[2] Chongqing Univ Technol, Chongqing Municipal Key Lab Inst Higher Educ Moul, Chongqing 400054, Peoples R China

[3] Southwest Univ, Sch Mat & Energy, Chongqing 400715, Peoples R China

来源：

APPLIED SCIENCES-BASEL | 2019年 / 9卷 / 20期

关键词：

chemical bath deposition; FeS coating; lubrication; tribological property; wear; FRICTION-REDUCTION; SOLID LUBRICATION; STEEL; SURFACE; TEMPERATURE; LAYER; FILMS; PERFORMANCE; DIFFUSION; OIL;

D O I：

10.3390/app9204422

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

The FeS solid lubricating coatings were prepared on the AISI 5140 steel by chemical bath deposition (CBD) coating technique at various temperatures from 30 to 90 degrees C. The influence of temperature on microstructure, microcracks, and tribological properties was characterized and studied by X-ray diffraction (XRD), scanning electron microscope (SEM), and energy dispersive spectrometry (EDS). The results show that the coating mainly consists of FexSy (FeS, FeS2, and Fe1-xS), and has a chrysanthemum-shaped (CS) morphology composed of the FeS crystal petals. The CS particles nucleate at about 30 degrees C, rapidly grow and reach a peak thickness at about 50-70 degrees C, and finally disappear and are replaced by disordered thick petals at 90 degrees C. The wear resistance of the steel was improved obviously after introducing of FeS coatings, owing to that the coatings can provide better lubrication and improve the wear resistance.

引用

页数：10

共 47 条

[1] Low-Temperature Plasma Nitriding of Mini-/Micro-Tools and Parts by Table-Top System
Aizawa, Tatsuhiko
Morita, Hiroshi
Wasa, Kenji
[J]. APPLIED SCIENCES-BASEL, 2019, 9 (08):
[2] Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding
Basu, A.
Majumdar, J. Dutta
Alphonsa, J.
Mukherjee, S.
Manna, I.
[J]. MATERIALS LETTERS, 2008, 62 (17-18) : 3117 - 3120
[3] The Influence of Surface Texturing on the Frictional Behaviour of Parallel Sliding Lubricated Surfaces under Conditions of Mixed Lubrication
Bijani, Dariush
Deladi, Elena L.
Akchurin, Aydar
de Rooij, Matthijn B.
Schipper, Dirk J.
[J]. LUBRICANTS, 2018, 6 (04):
[4] Characterization of CuS nanocrystalline thin films synthesized by chemical bath deposition and dip coating techniques
Chaki, Sunil H.
Deshpande, M. P.
Tailor, Jiten P.
[J]. THIN SOLID FILMS, 2014, 550 : 291 - 297
[5] State-of-art review of past research on manufacturing of meso and micro cylindrical gears
Chaubey, Sujeet Kumar
Jain, Neelesh Kumar
[J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018, 51 : 702 - 728
[6] Roles of nanoparticles in oil lubrication
Dai, Wei
Kheireddin, Bassem
Gao, Hong
Liang, Hong
[J]. TRIBOLOGY INTERNATIONAL, 2016, 102 : 88 - 98
[7] Experimental analysis of bending fatigue strength of plain and notched case-hardened gear steels
Dengo, Carlo
Meneghetti, Giovanni
Dabala, Manuele
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2015, 80 : 145 - 161
[8] Strengthening and toughening austenitic steel by introducing gradient martensite via cyclic forward/reverse torsion
Guo, Ning
Zhang, Zhimin
Dong, Qingshan
Yu, Hongbing
Song, Bo
Chai, Linjiang
Liu, Cong
Yao, Zhongwen
Daymond, Mark R.
[J]. MATERIALS & DESIGN, 2018, 143 : 150 - 159
[9] Tribological Performances of FeS Solid Lubrication Duplex Layer under Liquid Paraffin Oil with n-Al2O3 Lubrication
Hu, Chunhua
Huang, Jian
Zhao, Haishan
Ma, Shining
Qiao, Yulin
[J]. MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 1526 - +
[10] Microstructures and Wear Resistance of Boron-Chromium Duplex-Alloyed Coatings Prepared by a Two-Step Pack Cementation Process
Hu, Jianjun
Zeng, Jing
Yang, Yan
Yang, Xian
Li, Hui
Guo, Ning
[J]. COATINGS, 2019, 9 (09)

← 1 2 3 4 5 →