Effects of carbon black and graphene nano-platelet fillers on the mechanical properties of syntactic foam

被引：29

作者：

Ciardiello, R. ^{[1
]}

Drzal, L. T. ^{[2
]}

Belingardi, G. ^{[1
]}

机构：

[1] Politecn Torino, Dept Mech & Aerosp Engn, Corso Duca Abruzzi 24, I-10129 Turin, Italy

[2] Michigan State Univ, Composite Mat & Struct Ctr, Dept Chem Engn & Mat Sci, 428 South Shaw Lane, E Lansing, MI 48824 USA

来源：

COMPOSITE STRUCTURES | 2017年 / 178卷

关键词：

Syntactic foam; Mechanical test; Graphene nanoplatelets; Carbon black; Lightweight; STRAIN-RATE; COMPRESSIVE PROPERTIES; BEHAVIOR; COMPOSITES; FIBER;

D O I：

10.1016/j.compstruct.2017.07.057

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Mechanical properties of an epoxy based syntactic foams are discussed in this study. Basic syntactic foam, composed of 30% of hollow glass spheres by volume, was modified with a 1% volume fraction addition of graphene nano-platelets (GnP), treated GnPs and carbon black (CB). In treated GnPs the hollow glass spheres and the GnPs were treated with 1-Pyrenecarboxaldehyde in xylene. The flexural, tensile, compressive and Izod properties of the five different combinations of these syntactic foams, both reinforced and not reinforced, were measured and compared with the pristine epoxy. The tests show that the reinforced foams had a higher modulus in all cases. The maximum tensile load decreased with the addition of the GnPs, while it increased when CBs were used. Scanning electron micrographs were used to evaluate the dispersion of the filler in the epoxy matrix and the interaction between matrix and fillers. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：9 / 19

页数：11

共 28 条

[1]

ASTM Standard D256-10, 2009, D25610 ASTM

[2]

ASTM Standard D638-14, 2009, D63814 ASTM

[3]

ASTM Standard D695-15, 2009, D69515 ASTM

[4]

ASTM Standard D790-15, 2009, D79015 ASTM

[5] Effect of carbon nanofibers on tensile and compressive characteristics of hollow particle filled composites [J].

Dimchev, Momchil ;

Caeti, Ryan ;

Gupta, Nikhil .

MATERIALS & DESIGN, 2010, 31 (03) :1332-1337

[6] High strain rate compression of cenosphere-pure aluminum syntactic foams [J].

Dou, Z. Y. ;

Jiang, L. T. ;

Wu, G. H. ;

Zhang, Q. ;

Xiu, Z. Y. ;

Chen, G. Q. .

SCRIPTA MATERIALIA, 2007, 57 (10) :945-948

[7] Compressive behaviour of unconstrained and constrained integral-skin closed-cell aluminium foam [J].

Duarte, Isabel ;

Vesenjak, Matej ;

Krstulovic-Opara, Lovre .

COMPOSITE STRUCTURES, 2016, 154 :231-238

[8] Compressive fracture features of syntactic foams-microscopic examination [J].

Gupta, N ;

Woldesenbet, E ;

Kishore .

JOURNAL OF MATERIALS SCIENCE, 2002, 37 (15) :3199-3209

[9] Hygrothermal studies on syntactic foams and compressive strength determination [J].

Gupta, N ;

Woldesenbet, E .

COMPOSITE STRUCTURES, 2003, 61 (04) :311-320

[10] Comparison of compressive properties of layered syntactic foams having gradient in microballoon volume fraction and wall thickness [J].

Gupta, Nikhil ;

Ricci, William .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 427 (1-2) :331-342

← 1 2 3 →